Theme
Digital Transformation
Green Transformation
CLAMPTEK ENTERPRISE CO., LTD.
Product Description :
Clamptek’s CLF5H series designed with connecting rod structure which can operate conveniently. CLF5H series can also reduce the interference with loading and unloading operation, because when CLF5H series is in the unclamping state, it’s clamping arm can be put lower than holding position.
Clamptek’s CLF5H series’ clamping arm is very flexible. By reducing the interference of the surrounding equipment, CLF5H series can save lots of working space.
Clamptek’s CLF5H series equipped with special dust proof design and high sealing, which can prevent the cutting chips and coolant to infiltration. Therefore, CLF5H series can be used in more severe conditions.
Please kindly check the suggested operating pressure as below,
Max. operating pressure: 70 kgf/cm2
Min. operating pressure: 10 kgf/cm2
Mighty Spraying Technology Co., Ltd.
Product Description :
1. High pressure diaphragm pump with high efficiency.
It pumps wide range viscosity fluid (Max. 160 cst.).
2. Build-in circulating pump(U.S. Patent No.:
11542934), prevent overheat and service life time.
3. Simple and compact design, can be run in dry
condition without damage to the pump
in case of accident or operator error.
4. Low pulsation, prevent vibration of cutting tools.
5. Low rpm working is available, Minimum rpm:
300rpm.
6. High working pressure: 70 bar.
7. Energy saving, especially when combine with
brushless electric motor can be run at very low
speed under very low power consumption.
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
Product Description :
1. CEN03 type is without timer (also could be controlled by Programmable Logic Controller) and has to work with volume distributors. With CAB or CBB type volume distributor, oil will feed during operation time. With CDB or T type volume distributor, oil will feed during interval time.
2. The discharge volume is fixed. The lubrication points of volume distributor supply a fixed flow of oil.
3. It has a spark-eliminator inside to prevent the sparks producing when the electric current is running. The spark-eliminator can avoid PLC (Programmable Logic Controller) being interfered.
4. CEN03 type has a pressure switch device and been set up as 8kg/cm2, which assures the oil volume of lubrication point and check if the piping works normally. The standard specification is NC (Normal Close) contact, which means if the pressure is abnormal, it will have signal. NO (Normal Open) contact is available on request.
5. It has a float switch that can detect the oil volume. When oil is lower than the minimum level, the float switch will automatically send a continuous signal.
6. It has a pressure gauge where an operator can check the pressure easily.
7. Do not press the force feed-oil (F button) more than three minutes in order to avoid overloading. When the temperature reaches 100℃, the sensor will be on to stop the motor continuing running about 5 minutes.
8. It can be used for the machines requiring strictly rationing oil flow. It is usually used for such as processing machines or projecting machines.
ZHAO YI HSIN INDUSTRIAL CO., LTD.
Product Description :
Providing clean compressed air without energy consumption
No power required
Applying characteristics of compressed air, hydromechanics and physical principles to design internal structure.
Consumable-free, maintenance-free
Exclusive patented structural design can separate moisture from compressed air without consumables.
Efficiency of air drying and moisture filtration: 99%
Patented high efficiency water-cooled heat exchanger and special air-water separation structure.
High quality, durable, and longevity up to 10 years
No compromise on quality, the product is made in Taiwan.
No electronic and other energy-driven device
Suitable for those who have special needs for compressed air.
CLAMPTEK ENTERPRISE CO., LTD.
Product Description :
Clamptek’s CLKA series is using the optimal designation, so the clamping capacity is higher than other cylinders. The cylinder body and the fulcrum are integrated structured. Therefore, the cylinder’s size is smaller and it’s more solid and firm.
Clamptek’s CLKA series uses special dust seals to ensure the high dust proof and high sealing performance. As for the lower flange part, which uses minimized designation, it’s suitable for the compact and light fixture.
If you have any customized requests, please feel free to contact us.
Please kindly check the suggested operating pressure as below,
Max. operating pressure: 70 kgf/cm2
Min. operating pressure: 10 kgf/cm2
HABOR PRECISION INC.
Product Description :
HABOR_ HIG DC Inverter Cooler_ High energy-saving X Low-carbon emission
Upgraded with new generation refrigerant_ R513A which is Low-GWP to reduce the warming influence, Habor HIG series is the best partner for green machine tools.
Habor HIG series is a DC inverter cooler integrated technologies of smart IoT, energy-saving, high-accuracy control, equipped with Ethernet Communication protocol for remote setting and real time monitoring, intelligent management of predictive maintenance and status detection.
Thanks to speed control and frequency conversion technology, HIG series can save energy cost up to 60%. In 2024, we announced new coolers which uses LOW-GWP refrigerant R513A on the base of use less refrigerant system to reduce carbon emission up to 70% .
Habor provides wide range of high precision temperature control system to machining process, such like cooling for spindles, coolant, linear motors, ball screw, gear box, hydraulic systems….etc.
Going forward Net Zero by 2050, except DC inverter cooler unit, Habor also provides various solutions to help users to save cost of factory electrical consumption. For more information, you are welcome to our booth in TMTS2024.
Habor Booth No. P0114, 1F Hall 2
JASON AUTOMATION CO., LTD.
Product Description :
As part of Emerson Automation Solutions, AVENTICS is one of the world’s leading product brands for pneumatic components and systems. The pneumatic engineering brand provides products and services for industrial automation, as well as the food, packaging, medical, and energy technology industries. For our pneumaitcs brand, we also develop solutions for the commercial vehicles, marine, and railway technology sectors.
DYNA COMPRESSOR CO., LTD.
Product Description :
Air end compression system
100% imported from Germany. Inorder to ensure the quality ofoperation and stable air flow of the air compressor, we use Germanhigh-precision rotors with stableperformance, excellent quality, and more durablity.
Dyna Compressor With continuous R&D and renovation, our product is advance with times, our goal is to be the most competitive brand,
professional, exquisite, design that with enough flexibility and mobility to meet challenges of the market. Customized is our standard procedure. We grab every possible chance to provide new opportunity and vitality for
industrial reengineering. Under this rapidly changing, competitive era, the
only constant belief of ours is “quality is our strength”.
WEXTEN PRECISE INDUSTRIES CO., LTD.
Product Description :
■All models use DC inverter compressors with smooth start-up, no instantaneous large
starting current characteristics, and low power consumption.
■When the heat load is low, the cooling unit operates at a low load, with high energy efficiency.
■The exclusive design of the multi-function LCD panel with an accuracy of ±1℃ can keep the
electric cabinet at a constant temperature, control heat sources, and improve the lifespan of
electronic components.
■ Uses environmentally friendly refrigerants with low Global Warming Potential (GWP) values.
■More than 95% of materials that can be recycled, contributing to environmental protection.
