Theme
Digital Transformation
Green Transformation
LIS AUTOMATIC CONTROLLED CO., LTD.
Product Description :
The PJ-20S is a fixed volume medium pressure system without tank designed. Suitable for a general manufacturing environment, designed for Swiss lathes.
-modular PCB, easy to maintenance
-intuitive control panel, easy to operation
-3 sets of M code output
-compact size, saving space
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
Product Description :
1. CEN03 type is without timer (also could be controlled by Programmable Logic Controller) and has to work with volume distributors. With CAB or CBB type volume distributor, oil will feed during operation time. With CDB or T type volume distributor, oil will feed during interval time.
2. The discharge volume is fixed. The lubrication points of volume distributor supply a fixed flow of oil.
3. It has a spark-eliminator inside to prevent the sparks producing when the electric current is running. The spark-eliminator can avoid PLC (Programmable Logic Controller) being interfered.
4. CEN03 type has a pressure switch device and been set up as 8kg/cm2, which assures the oil volume of lubrication point and check if the piping works normally. The standard specification is NC (Normal Close) contact, which means if the pressure is abnormal, it will have signal. NO (Normal Open) contact is available on request.
5. It has a float switch that can detect the oil volume. When oil is lower than the minimum level, the float switch will automatically send a continuous signal.
6. It has a pressure gauge where an operator can check the pressure easily.
7. Do not press the force feed-oil (F button) more than three minutes in order to avoid overloading. When the temperature reaches 100℃, the sensor will be on to stop the motor continuing running about 5 minutes.
8. It can be used for the machines requiring strictly rationing oil flow. It is usually used for such as processing machines or projecting machines.
CLAMPTEK ENTERPRISE CO., LTD.
Product Description :
Clamptek’s CLF5H series designed with connecting rod structure which can operate conveniently. CLF5H series can also reduce the interference with loading and unloading operation, because when CLF5H series is in the unclamping state, it’s clamping arm can be put lower than holding position.
Clamptek’s CLF5H series’ clamping arm is very flexible. By reducing the interference of the surrounding equipment, CLF5H series can save lots of working space.
Clamptek’s CLF5H series equipped with special dust proof design and high sealing, which can prevent the cutting chips and coolant to infiltration. Therefore, CLF5H series can be used in more severe conditions.
Please kindly check the suggested operating pressure as below,
Max. operating pressure: 70 kgf/cm2
Min. operating pressure: 10 kgf/cm2
CASROMA CORPORATION
Product Description :
1、由植物提煉為添加劑，取代傳統石油化學基底的切削油。
2、可提供更佳的效能，且不傷害健康。
3、環保，可循環再生使用，降低環境汙染。
4、易分解，不造成「地球的負擔」。
LIS AUTOMATIC CONTROLLED CO., LTD.
Product Description :
The PJ-30VT is a frequency control (variable volume) complex system. Supplied for maximum 70bar (1000psi), 100bar (1500psi) or 140bar (2000psi) working pressure to Swiss Lathes, CNC Lathes, and Machining Center. This system carries the LIS Automatic patent high-performance centrifugal filtration device, extended the lifetime of the consumables, and also lets the system more stable. Designed for the restricted tank capacity machine, reduced the problems of the tank foaming and overheat effectively.
CLAMPTEK ENTERPRISE CO., LTD.
Product Description :
The Thread-body single acting hydraulic cylinder use imported oil seal and accessories to guarantee the quality. No oil leakage while clamping in high pressure for a long time. The volume of the thread-body single acting hydraulic cylinder is small. It can be utilized in a small space in the fixture.
This hydraulic cylinder is used to extend out, and when spring returns, but it can't be used for pulling back.
The angle degree between the cylinder and workpiece could not be larger than 10° while installing.
The bottom of the cylinder barrel needs a leakage-proof gasket.
Max. operating pressure: 250 kgf/cm²
Min. operating pressure: 20 kgf/cm²
Single acting
Usable fluid:
R PLUS TECHNOLOGY CO., LTD
Product Description :
Japan imported high-precision CNC machining equipment
body surface after grinding or wire drawing process, the appearance of beautiful delicate
simple structure compact, ventilation volume
WEXTEN PRECISE INDUSTRIES CO., LTD.
Product Description :
■ The unit is lightweight, easy to install and noiseless.
■ Unlike traditional air conditioners, the system utilizes oil/water for heat exchange, instead of piping refrigerant gas directly to the cooling coils.
■ Amazing performance even in high environmental temperatures.
■ Achieving energy savings and carbon reduction by applying secondary circulation with P.C.W. or the oil/water coolers.
■ No compressor, no need for refrigerants, so no concerns about Global Warming Potential (GWP) values.
REAL TERN INDUSTRIAL CO., LTD.
Product Description :
【Custom Product】
OEM ODM｜WE FOLLOW YOUR REQUIREMENT!
【Technical Evaluation】
Special heat exchange project service
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
Product Description :
1. KGC and KGCP types are suitable for grease NLGI grades 000, 00 and 0.
2. Recommend using a grease gun for filling with lubricant from grease inlet. It can avoid air or impurities dropping into the reservoir.
3. KGC and KGCP types are controlled by PLC (Programmable Logic Controller). It can work with CV type Progressive Feeders which can supply fixed volume of grease. CV type Progressive Feeders can assure each of lubrication point has equal amount of grease.
4. Pressure switch can be added on request for checking if the piping works normally. The standard setting is at 60 bars and the standard specification is NC (Normally Closed) contact, which means if the pressure doesn't reach the default setting, it sends continuous signals. NO (Normally Open) contact is available on request.
5. Magnet Level Switch is also an optional accessory that can be added upon request. It sends continuous signal automatically when the grease level is lower than the minimum level.
6. For the first time use, slightly press the Feed button (F button) to feed grease immediately. F button can be used as manually grease feeding for no more than 3 minutes.
7. AC110V and AC220V motors have thermal controls. When the motor temperature reaches 100℃, the sensor will be on to stop the motor continue running about 5 minutes.
8. It has a pressure gauge that the operator can check the pressure easily.
9. It can be used for the machines requiring strictly rationing grease flow. It usually works with rubber or plastic machines, press machines, machine centers, woodworking machines, etc.
