展覽主題
數位轉型
綠色轉型
彰化振榮油機股份有限公司
產品描述 :
1. 適用於潤滑油脂及低流動性潤滑油之注油機，適用之液態黃油黏度為NLGI 000號、00號、0號。
2. 以黃油槍或氣動加油機經由黃油嘴加入油料之方式，降低油料之異物混入。
3. 由PLC控制，可搭配CV型單一循環分配器使用，更能控制其給油量。CV型分配器特點是「油量固定」，亦即每個潤滑點可獲得同樣的潤滑油量，CV型每次循環每一孔之吐出量均為0.18cc，亦可由本公司廠內合併多孔，使油量增加。
4. 可加裝壓力開關〈選配〉，出廠設定切換壓力為60 bar，可檢查油路有無破損，並可確保潤滑點所需之潤滑油量。壓力開關標準規格為NC常閉接點，即壓力沒有達到預設值時會產生異常訊號，亦可選擇NO常開接點，訂購時請先註明。
5. 可加裝磁簧油位檢知裝置〈選配〉，即油量過低時，能自動發出訊號，訂購時請先註明。
6. 附強制給油鍵，可由人工強制注油。
7. AC110/220V馬達標準配備溫控安全裝置，當溫升達100℃，馬達將暫時停機約5分鐘。
8. 設有壓力錶，可直接目視出油時之壓力狀況。
9. 適用於嚴格要求潤滑油流量一致之機械設備。一般常用於橡塑膠機、沖床、中心加工機，木工機等。
HYDROKOMP GmbH
產品描述 :
Swing clamp cylinders release the clamping point on the workpiece. With this, it is easy to change the workpiece. This hydraulic swing clamp cylinder operates as single-acting or double-acting traction cylinder, whereas part of the stroke is used to rotate the piston. The model with 0° swing angle operates only vertical as traction cylinder.
To guarantee a long lifetime the cylinders have an integrated metal wiper as standard. For oil supply, the cylinders are equipped with threaded port and manifold port with O-ring for drilled channels. You can select between right or left turning models with various standardized swing angles. The integrated overload protection protects the swing mechanism from damage due blockage of the rotation or improper assembly of the clamping arm.
For any risk of exceeding the permitted volume flow a throttle check valve must be interposed into the oil supply line. Counter-hold the clamping arm when tightening or loosening the counter nut in order to prevent torque transfer to the piston rod and to avoid damage to the ball guide. Variations with 0°, 30°, 45°, 60° and 90° swing angles are available. The permitted operating pressure is depending from the clamping arm length.
