展覽主題
數位轉型
綠色轉型
麥瑟塔工業有限公司
產品描述 :
1. 高壓，高效率，可以使用於高黏度液體(160 cSt)。
2. 內建專利循環幫浦，幫浦工作溫度低，減少油溫對於
幫浦的影響。延長的使用壽命。
3. 特殊設計可以防止幫浦在沒有冷卻液時空轉也不會損
壞。
4. 低脈衝，防止加工刀具因為脈衝過高而抖動影響加工
精度。
5. 低轉速運轉：最低轉速：300 rpm。最高轉速：1200~1800 rpm。
6. 高壓力：最大工作壓力：70 bar。(高壓力另洽詢)
7. 節能，尤其用於連結伺服馬達使用時，搭配壓力感知
器，更會是最佳的組合。
8. 環保：MPD 幫浦可以使用純水系統上，雖說切削液是
加工中的重要冷卻介質， 但若MPD幫浦也可以減少冷
卻液的使用，對環境會更加友善。
9. 承受更高的汙染顆粒，最大顆粒 500 micron。
HYDROKOMP GmbH
產品描述 :
Swing clamp cylinders release the clamping point on the workpiece. With this, it is easy to change the workpiece. This hydraulic swing clamp cylinder operates as single-acting or double-acting traction cylinder, whereas part of the stroke is used to rotate the piston. The model with 0° swing angle operates only vertical as traction cylinder.
To guarantee a long lifetime the cylinders have an integrated metal wiper as standard. For oil supply, the cylinders are equipped with threaded port and manifold port with O-ring for drilled channels. You can select between right or left turning models with various standardized swing angles. The integrated overload protection protects the swing mechanism from damage due blockage of the rotation or improper assembly of the clamping arm.
For any risk of exceeding the permitted volume flow a throttle check valve must be interposed into the oil supply line. Counter-hold the clamping arm when tightening or loosening the counter nut in order to prevent torque transfer to the piston rod and to avoid damage to the ball guide. Variations with 0°, 30°, 45°, 60° and 90° swing angles are available. The permitted operating pressure is depending from the clamping arm length.
HYDROKOMP GmbH
產品描述 :
The rotary lever clamp is especially suited for clamping fixtures with only little space for the installation of clamping elements. Its construction and compact design allows flexible solutions at various installation conditions. HYDROKOMP offers hydraulic rotary lever clamps which are single-acting as well double-acting. They are used in clamping fixtures whose oil supply is made through drilled channels. To swing down the clamping arm, the linear motion is used pro rata which clamps the workpiece. To unclamp, the clamping arm swings back to where the workpiece can be safely taken out.
