展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
Taiwan TeamA Tech. Co., Ltd.
製品の説明 :
formlabs 熱銷光固化機種 Form 3+/3B+ 搭載專利研發「低應力光固化成型技術（LFS）」，其特色包含彈性樹脂槽與封閉式光學模組（LPU）等，雷射光可垂直照射到物件，大幅增加機器的可靠與穩定性，可印出高精確度、平滑度及透度更佳的高品質物件，桌面級的機種，也能達到工業級的效果。
搭配上為 Form 3+/3B+ 量身打造的後處理設備－自動清洗機 Form Wash 及恆溫光固機 Form Cure，提供完整、快速的 3D 列印製造流程。
Form 3+ 六大特色包括：
1. 前所未有的表面精細度
2. 極平滑的物件表面與透度
3. 彈性樹脂槽使成功率大增
4. 遠端列印超easy
5. 無與倫比的30多種多元樹脂材料
6. 輕觸支撐材帶來最佳效率
ENSINGER ASIA HOLDING PTE. LTD. TAIWAN BRANCH
製品の説明 :
Polyetheretherketone (PEEK) - TECAPEEK natural is a high performance, high temperature, semi crystalline thermoplastic manufactured by Ensinger and may use Victrex® PEEK 450G or Solvay‘s KetaSpire® KT-820 polymer. The most well known and important member of the polyaryletherketone group combines excellent wear, and very good mechanical properties, even under thermal load. Outstanding chemical resistance and a high operating temperature (up to 260°C) round out its profile, and make TECAPEEK an almost universally appropriate material for highly stressed parts.
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
製品の説明 :
1. KGC and KGCP types are suitable for grease NLGI grades 000, 00 and 0.
2. Recommend using a grease gun for filling with lubricant from grease inlet. It can avoid air or impurities dropping into the reservoir.
3. KGC and KGCP types are controlled by PLC (Programmable Logic Controller). It can work with CV type Progressive Feeders which can supply fixed volume of grease. CV type Progressive Feeders can assure each of lubrication point has equal amount of grease.
4. Pressure switch can be added on request for checking if the piping works normally. The standard setting is at 60 bars and the standard specification is NC (Normally Closed) contact, which means if the pressure doesn't reach the default setting, it sends continuous signals. NO (Normally Open) contact is available on request.
5. Magnet Level Switch is also an optional accessory that can be added upon request. It sends continuous signal automatically when the grease level is lower than the minimum level.
6. For the first time use, slightly press the Feed button (F button) to feed grease immediately. F button can be used as manually grease feeding for no more than 3 minutes.
7. AC110V and AC220V motors have thermal controls. When the motor temperature reaches 100℃, the sensor will be on to stop the motor continue running about 5 minutes.
8. It has a pressure gauge that the operator can check the pressure easily.
9. It can be used for the machines requiring strictly rationing grease flow. It usually works with rubber or plastic machines, press machines, machine centers, woodworking machines, etc.
JIN TAIRY ELECTRIC CO., LTD.
製品の説明 :
The source of PM2.5 is the two major emissions from vehicles and factories. PM2.5 is almost equivalent to the overall air pollution. Juntai Electronics has focused on industrial air pollution control in recent years, and has continuously developed innovative "oil mist air purifier" series, subverting the traditional thinking of oil mist machine operation, with unique outstanding efficacy and performance, using a unique centrifugal principle, lasting efficacy Constant, eliminating the cost of replacement of consumable materials and labor maintenance costs, compared to the same level model, it can save up to 20% of driving power, high efficiency and energy saving, regardless of appearance, design and performance, are the best in the industry.
HUI-JING ELECTRONIC CO., LTD.
製品の説明 :
Square Wave Type:
Product Features:
Output Mode: Line Drive
Signal Resolution Multiplier: 1, 4, 8, 32, 128~256
Output Pulse Count = Gear Teeth Count x Signal Resolution Multiplier
Voltage: 5V
Protection Level: IP68
Sine Wave Type:
Output Mode: Line Drive
Signal Resolution Multiplier: 1VPP (Sine Wave)
Voltage: 5V
Protection Level: IP68
