展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
製品の説明 :
1. KGC and KGCP types are suitable for grease NLGI grades 000, 00 and 0.
2. Recommend using a grease gun for filling with lubricant from grease inlet. It can avoid air or impurities dropping into the reservoir.
3. KGC and KGCP types are controlled by PLC (Programmable Logic Controller). It can work with CV type Progressive Feeders which can supply fixed volume of grease. CV type Progressive Feeders can assure each of lubrication point has equal amount of grease.
4. Pressure switch can be added on request for checking if the piping works normally. The standard setting is at 60 bars and the standard specification is NC (Normally Closed) contact, which means if the pressure doesn't reach the default setting, it sends continuous signals. NO (Normally Open) contact is available on request.
5. Magnet Level Switch is also an optional accessory that can be added upon request. It sends continuous signal automatically when the grease level is lower than the minimum level.
6. For the first time use, slightly press the Feed button (F button) to feed grease immediately. F button can be used as manually grease feeding for no more than 3 minutes.
7. AC110V and AC220V motors have thermal controls. When the motor temperature reaches 100℃, the sensor will be on to stop the motor continue running about 5 minutes.
8. It has a pressure gauge that the operator can check the pressure easily.
9. It can be used for the machines requiring strictly rationing grease flow. It usually works with rubber or plastic machines, press machines, machine centers, woodworking machines, etc.
KAO MING MACHINERY INDUSTRIAL CO., LTD.
製品の説明 :
1. 門寬2.1米以下，底座採用雙線軌設計；門寬2.3米以上底座採用三線軌設計，並具有硬軌之高剛性結構，Z軸行程可達850mm。<br />
<br />
2. 三軸均配備大型滾柱式線性導軌；剛性與速度兼顧。<br />
<br />
3. Y軸採用階梯式導軌設計，上軌與下軌段差225mm的特殊設計，使主軸頭不易前傾，同時分擔了部份Y軸失利於立柱的推力，使主軸頭在重切削負荷時，非常穩定；並以垂直方式偏置排列，確保最佳結構剛性。<br />
<br />
4. 主軸以直結式傳動，減少軸不對心引起的振動，提高切削性能與精度。<br />
<br />
5. 最佳主軸頭中心對稱式設計，減少熱變位影響，確保主軸精度。<br />
<br />
6. 利用有限元素分析(FEA)先進實務觀念，設計出最佳化底座立柱及橫樑等主要結構剛性。<br />
<br />
7. 三軸使用高精度並施以預壓及預拉之滾珠導螺桿；X軸採中空設計並通過冷卻油，且螺桿兩端之稱軸承外環，有空氣冷卻之特殊設計，減少熱變形，確保最佳之定位精度。<br />
<br />
8. Z軸油壓平衡配重；在Z軸上使用兩支油壓缸抵消主軸頭重量，確保加工時的穩定性。<br />
CAMPRO PRECISION MACHINERY CO., LTD.
製品の説明 :
Campro presents the new NT series CNC lathe which is based on high quality cast iron for perfect stiffness and vibration characteristics. 30° cast iron inclined bed ensures quick chip evacuation. NT-208SM equips BMT Living Turret and C-axis control which enables machine to perform milling functions. Through synchronized control of 8” Main spindle / 6” Sub-spindle to complete the greatest amount of primary and secondary turning possible in one compact platform.
Dah Young Vacuum Equipment Co., Ltd.
製品の説明 :
High Power Impulse Magnetron Sputtering (HiPIMS) is a high-power pulsed power supply system used on magnetron sputtering coating technics. Compared to the traditional DC sputtering system, HiPIMS could generate tens of times higher pulsing current to obtain a ten thousand times higher-density electron plasma. Effectively enhancing the ionization rate to obtain a non-porous, high density crystallinity film at lower coating temperatures.
DAH YOUNG's DYHC HiPIMS series sputtering coater power supply and chamber cavity are designed to provide high plasma density (1018~19e-/m3) and high ionization rate (70~100%), increasing the substrate coating compactness, adhesion flatness and corrosion resistance. The lower duty cycle (<5%) results in a significant reduction in process temperature offering more substrate options on PEN, PET, etc. fiexible substrates.
Please refer to：https://zh-tw.dahyoung.com/
