展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
JEFFER MACHINERY CO., LTD.
製品の説明 :
This machine comes in a one-piece construction that has been heat-treated to achieve maximum rigidity. The rails are thermal treated and precisely ground to reach hardness of more than HRC 60˚. Furthermore, options are available to adopt rails of various lengths to meet different knife grinding requirements. The machine length can be customized for specific needs from 1,600 to 4,000mm. Rough and finish grinding wheels can be controlled manually and automatically. The minimum grinding wheel downfeed amount is 0.005mm and the spindle is equipped with an automatic cooling system which ensures excellent cooling effect. The SSG-8 employs an automatic lubrication system for smoother operation and longer service life.
SSG-8 Feature :
1. Knife tools movement type.
2. After grinding by coarse wheel and fine wheel, knife
tools can be sharp.
3. Force cooling system on motor shaft obtains better
cooling effect for the knives.
4. Grinding wheel lifting seat is used by ball bearing screw,
it can adjust up and down movement in precision.
5. Water splash guard and coolant tank are made of
stainless steel.
6. Grinding Capacity (Magnetic Chuck) LxW :
2500x200mm
JIN TAIRY ELECTRIC CO., LTD.
製品の説明 :
JPS Technical Specifications
• Input voltage regulation range: rated voltage±15%
• Output efficiency: more than 95%
• Output stability rate: rated voltage±1%
• Waveform distortion: No distortion (compared with input waveform)
• Overload capacity: Above 150% of the rated output current
• Working environment: -0C~+40C
• Induction time: less than 0.1 seconds (less than 5 weeks)
• Working humidity: 95%
JPS Features
• Intelligent logic voltage regulation method
• Self-detection function
• LED indicator on the panel
• Patented bypass device included
• Large-range over-high and low-voltage protection device
• Under-phase instantaneous power failure short-circuit protection device
• Prevent activation of over-voltage device (SOVP)
Electronic double circuit panel design
• The internal panel voltage can monitor the three-phase voltage
• The DIP switch function is easy to set up
• Separated voltage stabilization design, three-phase unbalanced 100%
• Taiwan Patent No. 60215 62577
• Mainland Patent No. 12559 5390066
KAO MING MACHINERY INDUSTRIAL CO., LTD.
製品の説明 :
1. 門寬2.1米以下，底座採用雙線軌設計；門寬2.3米以上底座採用三線軌設計，並具有硬軌之高剛性結構，Z軸行程可達850mm。<br />
<br />
2. 三軸均配備大型滾柱式線性導軌；剛性與速度兼顧。<br />
<br />
3. Y軸採用階梯式導軌設計，上軌與下軌段差225mm的特殊設計，使主軸頭不易前傾，同時分擔了部份Y軸失利於立柱的推力，使主軸頭在重切削負荷時，非常穩定；並以垂直方式偏置排列，確保最佳結構剛性。<br />
<br />
4. 主軸以直結式傳動，減少軸不對心引起的振動，提高切削性能與精度。<br />
<br />
5. 最佳主軸頭中心對稱式設計，減少熱變位影響，確保主軸精度。<br />
<br />
6. 利用有限元素分析(FEA)先進實務觀念，設計出最佳化底座立柱及橫樑等主要結構剛性。<br />
<br />
7. 三軸使用高精度並施以預壓及預拉之滾珠導螺桿；X軸採中空設計並通過冷卻油，且螺桿兩端之稱軸承外環，有空氣冷卻之特殊設計，減少熱變形，確保最佳之定位精度。<br />
<br />
8. Z軸油壓平衡配重；在Z軸上使用兩支油壓缸抵消主軸頭重量，確保加工時的穩定性。<br />
MATRIX PRECISION CO., LTD.
製品の説明 :
GHP-3540 applies the FANUC controller and high speed grinding spindle, through the in-house developed intelligent conversation window software, it can flexibly output the required tooth profile and grinding parameter. The machining workpieces include the involute gears and cycloidal gears, the high efficiency and high precision expressed from the product are equivalent to worldwide top brand's ones. GHP-3540 is your best choice.
MING YANG MACHINERY CO., LTD.
製品の説明 :
The model MTY 51/65 is equipped with a dual spindle double turret and double Y axes. The machine is combined with FANUC 31i PLUS for simultaneous control on triple tool systems. The machining support two turrets for one spindle and one turret for two spindles at the same time. In other words, each process will collaborate with three tools. Mostly, the machine improves 50% efficiency.
JASON AUTOMATION CO., LTD.
製品の説明 :
As part of Emerson Automation Solutions, AVENTICS is one of the world’s leading product brands for pneumatic components and systems. The pneumatic engineering brand provides products and services for industrial automation, as well as the food, packaging, medical, and energy technology industries. For our pneumaitcs brand, we also develop solutions for the commercial vehicles, marine, and railway technology sectors.
TAIWAN MACHINE TOOL CO., LTD.
製品の説明 :
Strong casting and the perfect boxway stucture provides excellent cutting capacity for TTB-20MW Series. Sub-spinfle with milling function and Y-axis can satisfy customers' miltiple needs.
-The one cast base incorporates FEM analysis to achieve its optimal ribbing and structure to further enhance machine rigidity and stability.
-The 30 degree slant bed design has low center of gravity for easier swarf management and better erogonomic design. The TTB-20MW Series also offer optional rear type chip conveyor.
-To make sure the usage life of Y-axis ballscrew will get longer, there are three bearing on Y-axis ballscrew to enhance the support for pressure from top.
-The TTB-20MW Series can achieve maximum 20m/min for X axis and 25m/min for X axis. And the servo motors adopt absolute encoders for faster and more reliable positioning.
HAWE Hydraulik Singapore Pte. Ltd. Taiwan Branch
製品の説明 :
Directional seated valves are a type of directional valve. As cone valves they are tightly sealed, with zero leakage in the closed state.
The directional seated valve type ROLV is available as a 3/2, 4/2 or 4/3-way directional seated valve with different plug types. The patented assembly consists of two parts: a round basic valve with the valve inserts, and an adapter plate which can be designed for manifold mounting with nominal size NG 6 as the
standard connection pattern, or for direct pipe connection.
Additional elements such as a check valve, a restrictor (on the consumer side) and/ or restrictor check valves can be integrated, depending on the functional requirement and adapter plate. The type ROLV can be combined in the valve bank type BA with other types of valves.
Features and benefits
■ Dirt-resistant design with high switching reliability
■ Interchangeable solenoid for greater flexibility and easy servicing
Intended applications
■ Machine tools (cutting and non-cutting)
■ Clamping tools, punching tools, fixtures
■ Testing machinery
■ Wind turbines
7-LEADERS CORP.
製品の説明 :
End Mills for Aluminium- 3 Flutes
Design with sharp cutting edge, high removal cutting geometry, and fine grinding smooth surface to prevent sticking problem.
Higher finishing of cutting edge to have better surface roughness after processing.
Application for roughing and finishing in various Aluminium.
PHD Books Co., Ltd.
製品の説明 :
機械雜誌的第一品牌
充滿未來性之「機械新刊」具備三點特色：
第一，「選對的主題」。機械新刊每月所挑選的文章，都是對機械產業非常重要的指標性主題，多元化的內容整合，適合讀者每月翻看，汲取新知。
第二，「用對的人」。機械新刊之主編群結合產、官、學、研各界專家菁英，提供最優值的文章和綿密的產業資訊。現在是知識經濟的時代，在知識情商方面，哪一家公司有新產品？哪一家公司有好技術？透過機械新刊廣大的客戶產品資訊，讓您在通路行銷，研發製造各方面都能領先群倫。
第三，「做對的事」。機械新刊的市場定位及聚焦策略，考量傳承與創新之間的平衡，希望雜誌內容能兼顧廣度與深度，除了持續保持專業文章的深度，更重要是與市場貼近，完全掌握市場脈動，同時加入人文的溫度。
2017年起，博士文創事業經營機械新刊，以「廣遞新知，用心規劃」為宗旨，努力建立遍及海內外的讀者群。我們計畫以台灣為中心，向海外拓及讀者群，讓所有華語專業人士，都能翻閱機械新刊，從中獲得想要的資訊。另外，我們要使刊物成為客戶最佳的行銷利器。我們充分瞭解客戶的需求，讓機械新刊成為情資收集的專業平台，展示產品的最佳舞台。機械新刊紙本刊物搭配電商規劃，讓廠商在數位時代，將有更高更長久的曝光。
機械新刊充滿前景，「選對的主題」、「用對的人」、「做對的事」，我們的團隊專業，充滿競爭力，發行人出身機械產業，親身投入用心經營。機械新刊才剛要開始發光發熱，我們有絕對的信心，成為機械雜誌的第一品牌。
