展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
DKSH Taiwan Ltd.
製品の説明 :
PC F series is designed to produce maximum distillate quality with minimum capital and operating costs. Each model is a compact skid-mounted unit, simple, safe and easy to move. Control is by a PLC, including the functions of feed and discharge, therefore allowing automatic operation and minimum supervision. All models are designed for continuous operation, 24h/day, and require just electrical supply and compressed air.
PC F series evaporators operate in a high vacuum condition, with the boiling chamber pressure set at 5-6 kPa (absolute vacuum), in order to save the thermal energy produced by the heat pump. In this way the boiling temperature of the wastewater is approximately 40°C (104°F) and typical phenomena (scaling, precipitation, corrosion) which may reduce the performance are either eliminated or considerably reduced.
From 0,7 to 24 m3/day – 0.13 – 4.4 US gpm of distillate
Dramatic reduction of volumes and disposal costs
Water reuse and matter recovery
LEADWELL CNC MACHINES MFG., CORP.
製品の説明 :
The multi-function machine with B-axis can easy have bevel angle drilling and cutting work. The best torque is 3000Nm, and with curved coupling, it can easily do a heavy cutting job shop work and also curved surface milling. The machine uses special Electro Spindle, which can reach 12000rpm, it is a special machine can do a first mill and end mill in the same machine. The Y-axis design is a perpendicular type, and match with our moving column machine structure, the Y-axis have complete movement. It will not have dead space for the travel. (Y-axis travel /-130mm).
Max. swing: 750 mm
Max. turning diameter: 670 mm
Max. turning length: 1700 mm
Bar capacity: 78 mm
X-axis travel: 600+50 mm
Y-axis travel: ±130 mm
Z1-axis travel: 1750 mm
Z2-axis travel: 1725 mm
B-axis angular stroke: 240°(-30°~+210°) mm
Spindle speed(chuck): 3500 rpm
Spindle nose(chuck): A2-8/10"
Spindle speed(electro): 12000 rpm
X/Y/Z1/Z2-axis rapid traverse: 30/24/30/30 m/min
Tool storage capacity: 40 T
HAWE Hydraulik Singapore Pte. Ltd. Taiwan Branch
製品の説明 :
Directional spool valves are a type of directional valve. They control the direction of
movement and the velocity of single and double-acting hydraulic consumers.
The directional spool valve type CWPN is a 4/3- or 4/2-way directional valve with standard connection pattern NG 6 (CETOP 03). It is directly actuated and a binary
valve.
The directional spool valve type CWPN can be flexibly combined with the common HAWE valve banks and compact hydraulic power packs. It can also be mounted on customer-specific manifolds or sub-plates.
Features and benefits
■ Universally usable thanks to standard connection pattern NG 6 (CETOP 3) according to ISO 4401-03 or DIN 24 340-A6
■ Modular system with various circuit symbols and actuation variants
■ Optionally also available with additional valves in port P
Intended applications
■ Machine tools
■ Wind turbines
■ Solar power plants
■ Industrial hydraulics
WELE MECHATRONIC CO., LTD.
製品の説明 :
1.立車主軸轉盤以進口交叉滾子軸承設計，確保重負荷的能力及長期的精度壽命。
2. Z軸226 mm方型滑枕搪孔軸採硬軌配Turcite B結構，VTC1612-CW標準行程900mm。
3.底座、立柱、橫樑、工作台等大型鑄件依製造需要，經由最新的3D設計，剛性最佳化，並以
多年經驗訂定有效的退火程序以消除殘餘應力，多年實際應用經驗，確實能達成有效的長期精
度保持性。
4.X、Z軸標準配備採用「雙編碼器」的「雙」半閉環回饋系統，經濟有效的提高各軸的定位精度。
(X、Z軸可選購德國Heidenhain或西班牙FAGOR光學尺)。
5.VTC-CW標準刀庫容量為16P(16儲位)，車刀型式及分配數目可依客戶要求處理。
6.主軸箱等關鍵零件係利用自有的「大型臥式鏜孔機」及「大型高精度三次元量測儀(三座標量床)」
確實達成應有的加工精度，確保優良的組裝基礎。
7.承襲歐美先進工具機廠的標準，以嚴格維護的「1.2米x1.2米」高精密度的方形標準平板做為精密
精度的基礎，對各項關鍵零件進行精密鏟花(刮研)，使機器的各處結合面和滑動面均能達到正確的
幾何精度，確保機器應有的精度和壽命。
8.搭配高規格的Fanuc數控系統，標準功能包含：15吋彩色液晶螢幕、Fanuc全鍵式操作面板、
2MB記憶容量、Ethernet網路接口、Flash記憶卡插口、剛性攻牙及各種特殊補間(插補)等多項
高規格功能，能經濟有效的滿足各種使用需求。
9.採用的各項配套零組件均經過長期使用驗證，可確保機器長期運行的可靠性。
10.完整的品檢測試流程，搭配先進的自動光學直準儀、雷射干涉儀、球桿檢測儀、線上動平衡儀等
精密檢測儀器，確保出廠的機器都能達到設計的性能和應有的功能。
11.經驗豐富的研發團隊，突破老舊的包袱，協助客戶達成各種特殊需求。
12.兼具經驗和熱誠的服務團隊和完整的服務體系，可以及時有效的讓用戶的機器長保最佳使用狀態。
JIN LI CHENG CUTTING TOOL CO., LTD.
製品の説明 :
※Special chip out and geometric flute design. Excellent chip out perfomance without burrs. For various materials including the ductile stainless steel.
※Multinational patented drill point angle and double ute design. Great wear out resistance Keep long time precise drilling.
※With both function of Drill and Reamer design and its accuracy tolerance is within 0.01mm. It also can save tool change time while processing.
※With European carbide round bar and exclusive cutting angle design, We run the polish process on all the end mills, and it leads the tools easy to remove chips and keep the double life time than other competitors.
※Based on Europe composite coating with internal coolant holes, it leads the JLC at drill much longer life time and reduce customer lots of processing cost.
EANG LIAN CORPORATION
製品の説明 :
UNION Professional Honing Brushes Applications: Brake Cylinders, Hydraulics, Valve Guides Abrasive Type/Grit Size : #80、#120、#180、#240、#320、#500、#600、#800 Strong twisted wire handle for Hand or Drill use. Sizes to suit bores from 6.3 to 203mm. Ideal for surface finishing, blending and burr removal. Always use good quality honing fluid and start honing at low speed.</p>
PHB Flexible Honing BrushesF/lexible Honing Brushes
FAIR FRIEND ENTERPRISE CO., LTD.
製品の説明 :
★Gantry type structure
- Designed with a gantry type structure, the Feeler U800-5AX 5-axis machining center has the feature of spacious machining space, allowing large workpiece to be loaded and unloaded with ease. It is also convenient for operator to check the current machining condition at any time.
★U-shaped construction of base and column
-The advanced U-Shape structure significantly increases structural rigidity and machining accuracy.
-X.Y.Z axis rapid traverse rate reach 48m/min.
- Suitable for equipping with a large diameter of rotary table.
★Three axes overlap and separated from two rotary axes
- This design avoids a distance between the machining point and the intersection point of two rotating axes.
- Easy to compensate for the errors of radius on rotating axes and movement on three linear axes to ensure the machine's stability and accuracy.
★Separated design for three axes moving area and machining area
- This design feature not only makes chip removal more convenient, but also enables better chip-prevention capability of the machine.
- The rotaary shaft speed is increased by 800 rpm, which makes the turntable have a high-speed turning function.
