展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
YEONG CHIN MACHINERY INDUSTRIES CO., LTD.
製品の説明 :
￭ Robust roller linear guideways applied on 3 axes.
￭ Rigid dual-wall castings on saddle and 6 blocks design on X-axis can easily support workpieces weighing up to 1,500 kg.
￭ 4-linear guideways on Y-axis with superior large span ensures the best dynamic balance.
BUFFALO MACHINERY CO., LTD.
製品の説明 :
The DC12 is the most robust VMC in AXILE’s arsenal, perfectly suited for handling larger, lengthy workpieces. With a maximum table loading weight of 2.5 tonnes and maximum diameter of 2,200 mm X 1,200 mm, the DC12 takes on the larger, heavier parts common in the aerospace, power generation, and die and mold industries. Its double-column bridge construction allows for greater rigidity, as well as greater control over thermal deformation. As a result, the D12 is capable of deep cuts and complex contouring while maintaining utmost precision.
With larger workpieces come more chips, meaning the DC12 features excellent chip removal efficiency, to prolong tool life and ensure no residual interference. Therefore, the DC12 delivers the high surface quality expected by leading manufacturers.
YIH KUAN ENT CO., LTD.
製品の説明 :
1. IK milling heads can upgrade or replacement your original machine body, milling machine or special machine.
2. Chrome quill with super precision preloaded bearing can bring the high quality cutting benifits for machine and we also offer P4 bearings for your optional.
3. Machining travel can up to 127mm (5").
4. This product offer NT30 or R8 two kind of spindle machine model for you to optional.
5. Offer table 254x1720mm、X.Y.Z travel 851x405x440mm turret milling machine body (whole body) for you to optional.
6. There are 11 models in IK Turret Milling Machine Head Series.
With ultra-precision pre-load bearings, can bring you high-quality cutting benefits, but also provide P4-class bearings for you to choose from
CHIEN CHENS MACHINERY CO., LTD.
製品の説明 :
Specification
Table size: 1515 x 470 mm
Longitudinal travel: 1300 mm
Cross travel: 600 mm
Y slide way width: 720 mm
Z Slide high: MAX 810 mm
Z Slide way width: 420 mm
Spindle taper: NT#40(BT)
Spindle motor: 5HP / 4P
Spindle speed: 70~3600 RPM
Feeding speed: 10~6000 mm/min
Ballscrew: Ø32 mm C5
Net weight: 3500 kgs
WELE MECHATRONIC CO., LTD.
製品の説明 :
1.高剛性高穩定性結構
A. 底座：機器底座採用整體式鑄件，有效確保機器剛性。Z底座採4線軌設計，全行程範圍內直接落地支持，有絕佳的剛性及穩定性，確保整體長期幾何精度。
B. 滑座：滑座採用整體式鑄件，支撐於Z底座上，4線軌設計增加滑座負載剛性。
C. 立柱：立柱採用整體式鑄件，有效確保機器剛性；且固定不移動，大大減少主軸移動行程中所帶來的幾何精度誤差影響。
2. XYZ三軸及W軸導軌均採用先進的超重負荷型「滾柱」線性導軌，大幅度提高導軌「剛性」和「重切削能力」，也繼續保有「低摩擦力、低磨耗、低遲滯現象、低失位量、高速度、高精度、高動態特性、高壽命、不需調整」等線性導軌的優良特性。
3.XYZW四軸的均有過負載保護，如因誤操作造成撞機，可有效降低對機器的損傷。
4.雙編碼器回饋裝置（配置於XYZ三個進給軸)，B軸採用(圓光栅-角度編碼器) 廠牌：發格Fagor。
5.主軸箱等關鍵零件係利用「大型臥式搪孔機」及「大型高精度三次元量測儀（三座標量床）」確實達成應有的加工精度，確保優良的組裝基礎。
6.鞍頭：110主軸系統配備搪孔軸直徑110mm，搪孔軸行程W=500mm、3500 rpm(兩檔齒輪箱)。搪孔軸為氮化處理高硬度合金鋼件，前段支持使用傳統的硬化襯套外，後段附加線性導軌的加強支持，借助滾動低磨耗的特性，增長搪孔軸的精度壽命。
7.主軸前軸承採用直徑150mm的高精度主軸軸承，加上改良設計的軸承配置及潤滑設計，有效的提高主軸剛性和壽命。
8.主軸鬆刀採浮動式抓鬆刀裝置，鬆刀時不會施力於主軸軸承上，可長保主軸最佳精度；另，新式鬆刀缸配置設計，可使主軸於任一行程(W軸)位置換刀。
9.特殊設計的自動潤滑系統；潤滑油與切削液分開， 單獨收集可確保切削液的穩定性及工作環境的清潔。
10.刀庫採立柱側背式設計；刀庫與立柱接合，不同於落地型式，立柱固定不移動，刀庫與鞍頭配置可達成左右平衡架構，提高W軸動態穩定特性。
11.承襲歐美先進工具機廠的標準，以嚴格維護的「1.2米x1.2米」高精密度的方形標準平板做為精密度的基礎，對各項關鍵零件進行精密鏟花（刮研），使機器的各處結合面和滑動面均能達到正確的幾何精度，確保機器應有的精度和壽命。
12.採用的各項配套零組件均經過長期使用驗證，可確保機器長期運行的可靠性。
13.電氣箱採全密閉式循環熱交換系統，內部配線均參考德國工業安全標準，電源部份與訊號線區隔，以增加機器使用上的安全。
14.搭配高規格的Fanuc 0i MF Plus數控系統，標準功能包含：15吋彩色液晶螢幕、Fanuc全鍵式操作面板、1280米記憶容量、Ethernet網路接口、Flash記憶卡插口、Manual Guide i圖形對話式編程、剛性攻牙、手動剛性攻牙、AI contour control II等多項高規格功能，能經濟有效的滿足各種使用需求。
15.完整的品檢測試流程，搭配先進的自動光學直準儀、雷射干涉儀、球桿檢測儀、線上動平衡儀等精密檢測儀器，確保出廠的機器都能達到設計的性能和應有的功能。
16.經驗豐富的研發團隊，突破老舊的包袱，協助客戶達成各種特殊需求。
17.兼具經驗和熱誠的服務團隊和完整的服務體系，可以及時有效的讓用戶的機器長保最佳使用狀態。
HC FENG CO., LTD.
製品の説明 :
4 in 1 Coolant Purification System
1. Filtering floating debris and dirty particles
2. Oil/Water Separation, removes tramp oil down to 5% water content
3. Ozone Disinfection, eliminates bacteria and cleaned fluid backflow
4. Automatic control panel and pH detect device
TONGTAI MACHINE & TOOL CO., LTD.
製品の説明 :
‧The VP-12 combines the advantage of a smaller footprint with a large internal machining space, equipped with a high-speed spindle to meet the requirements of efficient and precise machining.
‧Direct-drive spindle BBT-40 provides a high rigidity and high efficiency.
‧The tool magazine allows for flexible tool placement and pre-selection, coupled with a high-speed ATC mechanism to reduce non-cutting time, showcasing efficiency similar to drilling and tapping machining centers.
‧High quality spindle and high rigidity structure design subject to high standards of machine accuracy to achieve good cutting performance.
‧By Tongtai production system, we check every detail process from design, manufacturing, assembly and QC.
YEONG CHIN MACHINERY INDUSTRIES CO., LTD.
製品の説明 :
NFX400A is designed especially for small, complex high-quality parts mainly for aerospace, automotive, medical, job shop and die & mold applications
￭ Extra wide column and base design to ensure best support and cutting rigidity.
￭ Increased tool life by cutting with belly and edge of the tool
￭ Reduce fixture error and improve workpiece loading and uploading time
￭ Greatly reduced non-cutting or setup waiting time
￭ Saves manufacturing cost with reduced fixture and electrode costs.
CHIEN CHENS MACHINERY CO., LTD.
製品の説明 :
Specification
Table size: 1515 x 470 mm
Longitudinal travel: 1300 mm
Cross travel: 600 mm
Y slide way width: 720 mm
Z Slide high: MAX 760 mm
Z Slide way width: 420 mm
Spindle taper: NT#50(BT)
Spindle motor: 7.5HP / 2P
Spindle speed: 62~1100 RPM
Feeding speed: 10~6000 mm/min
Ballscrew: Ø32 mm C5
Net weight: 3200 kgs
