展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
DI CHUN IRON WORK CO., LTD.
製品の説明 :
1. Lightweight design can reduce the spindle for the vertical lathe.
2. Built-in check valve and stroke control brackets.
3. Developed for rear locking installation.
4. Central bore for coolant, air with thread rotary union.
JIN YEAR PRECISION CO., LTD.
製品の説明 :
1.Down thrust with"semi-sphere"to prevent workpiece lift.
2.Mechanical/Hydraulic. Two operate methods.
3.Vise body is made of ductile iron FCD-60.
4.Vise bed hardened to HRC45 and maintain accuracy for long.
5.Vise bed height-size and the guide block side are all made with full control, can 2.3 or 4 vises to perform a job at a time.
6.Vise have 4 ways of clamping. For you to choice.
CLAMPTEK ENTERPRISE CO., LTD.
製品の説明 :
The Thread-body single acting hydraulic cylinder use imported oil seal and accessories to guarantee the quality. No oil leakage while clamping in high pressure for a long time. The volume of the thread-body single acting hydraulic cylinder is small. It can be utilized in a small space in the fixture.
This hydraulic cylinder is used to extend out, and when spring returns, but it can't be used for pulling back.
The angle degree between the cylinder and workpiece could not be larger than 10° while installing.
The bottom of the cylinder barrel needs a leakage-proof gasket.
Max. operating pressure: 250 kgf/cm²
Min. operating pressure: 20 kgf/cm²
Single acting
Usable fluid:
CLAMPTEK ENTERPRISE CO., LTD.
製品の説明 :
🔹The optimized design of the accessories of CHA / CHA-P series makes the structure more compact and increases the product strength.
🔹 CHA / CHA-P series equipped with special dustproof design and have high sealing performance.
🔹The designation of high anti-torque makes the durability long.
🔹 Max. operating pressure：70 kgf/cm²
Min. operating pressure：15 kgf/cm²
🔹Double acting
YOKE INDUSTRIAL CORP
製品の説明 :
1. 360° rotation and 230°pivot
2.Rotatable under load due to its unique ball bearing design.
3.Manufactured in accordance with EN1677‐1 and the requirements of ASME B30.26
4.Certified by DGUV GS‐OA‐15‐04
5. Forged alloy steel, quenched and tempered
6.With the Grade 100 High‐strength alloy steel, WLL is increased without increasing swivel size compared to other Yellow Point models.
7.4:1 Design factor
8.100% Magnaflux crack detected
9.Proof load at 2.5 times the WLL
10.Fatigue rated for 20,000 cycles at 1.5 times the WLL
HAWE Hydraulik Singapore Pte. Ltd. Taiwan Branch
製品の説明 :
Directional seated valves are a type of directional valve. As cone valves they are tightly sealed, with zero leakage in the closed state.
The directional seated valve type ROLV is available as a 3/2, 4/2 or 4/3-way directional seated valve with different plug types. The patented assembly consists of two parts: a round basic valve with the valve inserts, and an adapter plate which can be designed for manifold mounting with nominal size NG 6 as the
standard connection pattern, or for direct pipe connection.
Additional elements such as a check valve, a restrictor (on the consumer side) and/ or restrictor check valves can be integrated, depending on the functional requirement and adapter plate. The type ROLV can be combined in the valve bank type BA with other types of valves.
Features and benefits
■ Dirt-resistant design with high switching reliability
■ Interchangeable solenoid for greater flexibility and easy servicing
Intended applications
■ Machine tools (cutting and non-cutting)
■ Clamping tools, punching tools, fixtures
■ Testing machinery
■ Wind turbines
Taiwan TeamA Tech. Co., Ltd.
製品の説明 :
擺脫時間、地點的限制，利用自動化生產解決方案再創生產率新高！無需人工操作，24小時不停機生產，製造大量、高質量物件，使用 Formlabs 自動化解決方案（包含 Form Auto、群機管理和高容量樹脂系統），在 3D 列印工作流程中更高效的工作並重新定義生產能力。在不增加列印機管理複雜性的情況下擴展您的零件生產。從任何地方點擊發送，Formlabs 自動化解決方案將處理剩下的工作流程。
【最大程度地降低每個零件的成本，節省高達 80% 的勞動力】
在 Form Auto 出現之前，每個完成的零件都需要在後處理之前從成型平台上手動移除。Form Auto 透過將 Formlabs 獲得專利的「快速剝離技術」與「成型平台 V2 」結合使用，完全自動化地移除零件。蒐集的零件被放置在防紫外線的容器中，無縫批量轉移到 Form Wash。
【24 小時不間斷 3D 列印，無需額外程序】
Form Auto 自動化生產系統旨在不閒置列印機、不讓列印物件在序列中等待，無論現場是否有操作人雃，Form Auto 始終準備好開始下一次列印。 隨時隨地構建多列印機群，從辦公室點擊「列印」，立即在生產間開始生產。透過群機管理中的圖像和影片遠程監控和審查成品零件，設備內相機在完成時捕獲每個列印件來保存每個部分的記錄。
SHENG YU PRECISION MACHINE CO., LTD.
製品の説明 :
1. Low cost
2. Simple fixed angle (0~90°) 2 positions
3.Angle position detection
4. Used with four-axis group
Special specifications welcome to order
TAIKI INDUSTRIAL CO., LTD.
製品の説明 :
The soft jaws - 1.5mm x 60 Degree- standard type (SJ08037B) is used in the CNC lathe.
According to different process terms, customers can choose varied sizes to be more convenient, and avoid unnecessary correction movement.
Available in steel(S50C)
YANMECH Industrial Co., Ltd.
製品の説明 :
【A Series：】
1. The jaw can be individually operated, and irregularly shaped workpieces can be clamped.
2. Install side strips and chips cover sealed base jaw to prevent chips and coolant ingress.
【D Series：】
1. Install side strips and chips cover sealed base jaw to prevent chips and coolant ingress.
2. Adapter Plates can be selected.
3. The base jaw is lower than the body surface and can be used for multipurpose.
4. Alternative spindle adaptors:
ASA or DIN adaptors can be supplied as requested.
ACROW MACHINERY MFG. CO., LTD.
製品の説明 :
Rotating Coolant Union / Grippers (Clamping unit)/ Pallet Clamping Systems / Test Bar / Force Gauge
DI CHUN IRON WORK CO., LTD.
製品の説明 :
Drawdown power chuck feature of radial clamping will lead to almost no workpiece uplifting displacement; for machining casting and forging part:
1. For the clamped workpiece is oppressed to the surface, chucks are suitable for heavy machining.
2. Chuck Actuators with the cylindrical structure is durable and ensures high clamping repeatability.
3. Accurate self-centering and pull back features are adequate or precise length control machining requirements.
