展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
REN AN INFORMATION TECHNOLOGY CO., LTD.
製品の説明 :
RenAn's operation simulation workstation is a physical simulation with 3D graphic, showing the cutting and machining process.
[Save consumable cost]: There is no need to worry about the expenditure of consumables, and it will not be affected by pollutants such as waste materials and oil and gas.
[Safety]: Advanced 3D simulation and CNC virtual machine make high risk CNC operation without any danger.
[Smart learning]: Like training the pilot using flight simulators, we use CNC simulator to train the students or operators to be the machinist. Its industrial panel remains the same functionality as real machine that students can practice constantly to accumulate hands-on operation skills.
The controller series of simulator: Fanuc, Siemens, Heidenhain and Mitsubishi.
Turning, Milling, TurnMill, 4 axis, 5 axis.
WELE MECHATRONIC CO., LTD.
製品の説明 :
1.立車主軸轉盤以進口交叉滾子軸承設計，確保重負荷的能力及長期的精度壽命。
2. Z軸226 mm方型滑枕搪孔軸採硬軌配Turcite B結構，VTC1612-CW標準行程900mm。
3.底座、立柱、橫樑、工作台等大型鑄件依製造需要，經由最新的3D設計，剛性最佳化，並以
多年經驗訂定有效的退火程序以消除殘餘應力，多年實際應用經驗，確實能達成有效的長期精
度保持性。
4.X、Z軸標準配備採用「雙編碼器」的「雙」半閉環回饋系統，經濟有效的提高各軸的定位精度。
(X、Z軸可選購德國Heidenhain或西班牙FAGOR光學尺)。
5.VTC-CW標準刀庫容量為16P(16儲位)，車刀型式及分配數目可依客戶要求處理。
6.主軸箱等關鍵零件係利用自有的「大型臥式鏜孔機」及「大型高精度三次元量測儀(三座標量床)」
確實達成應有的加工精度，確保優良的組裝基礎。
7.承襲歐美先進工具機廠的標準，以嚴格維護的「1.2米x1.2米」高精密度的方形標準平板做為精密
精度的基礎，對各項關鍵零件進行精密鏟花(刮研)，使機器的各處結合面和滑動面均能達到正確的
幾何精度，確保機器應有的精度和壽命。
8.搭配高規格的Fanuc數控系統，標準功能包含：15吋彩色液晶螢幕、Fanuc全鍵式操作面板、
2MB記憶容量、Ethernet網路接口、Flash記憶卡插口、剛性攻牙及各種特殊補間(插補)等多項
高規格功能，能經濟有效的滿足各種使用需求。
9.採用的各項配套零組件均經過長期使用驗證，可確保機器長期運行的可靠性。
10.完整的品檢測試流程，搭配先進的自動光學直準儀、雷射干涉儀、球桿檢測儀、線上動平衡儀等
精密檢測儀器，確保出廠的機器都能達到設計的性能和應有的功能。
11.經驗豐富的研發團隊，突破老舊的包袱，協助客戶達成各種特殊需求。
12.兼具經驗和熱誠的服務團隊和完整的服務體系，可以及時有效的讓用戶的機器長保最佳使用狀態。
HAWE Hydraulik Singapore Pte. Ltd. Taiwan Branch
製品の説明 :
Compact hydraulic power packs are a type of hydraulic power pack. They arecharacterised by a highly compact design, since the motor shaft of the electric drive also acts as the pump shaft. Compact hydraulic power packs are designed to supply hydraulic circuits with hydraulic fluid.
The compact hydraulic power pack type INKA consists of the tank, the integrated motor and the radial piston pump or gear pump directly attached to the motor
shaft. The directly mounted electronic communication box with integrated realtime operating system allows the operating state to be recorded and visualised. The
measured values of the integrated multi-sensor (including the motor speed) can be passed on to the higher-level machine controls via standardised interfaces and processed there.
The consistently modular design of the type INKA means that different usage volumes and delivery flows can be realised quickly and easily from the modular
system. Compatible, ready-for-connection, complete solutions can be assembled easily using a wide range of connection blocks and the valve banks that can be combined with them.
Features and benefits
■ Prepared for condition monitoring with integrated sensors and communication box
■ Optimum efficiency through under-oil motor cooling, direct power transmission,and sophisticated heat dissipation
■ Suitable for nominal operating modes S2 (short period operation) and S3 (periodic intermittent operation)
■ Resource-saving due to small oil filling volume
Intended applications
■ Machine tools and material testing
■ Hydraulic tools
■ Handling systems
■ Presses and processing machines
TAIWAN MACHINE TOOL CO., LTD.
製品の説明 :
The CNC Tapping center, designed and manufactured by TMT, is your best choice in drilling and tapping work. The machine series employs a high speed traverse on the three axes to significantly increase drilling and tapping efficiency. The entire machine is ruggedly constructed to assure the highest machining accuracy.
-The casting parts of machine are manufactured from high quality Meehanite cast iron, rib reinforeced and stress released to assure it remains deformation-free year after year.
-Three axes slideways are mounted with precision linear ways. Extra large span between ways. High feed rate and superior stablility.
-Servo motor directly drives ballscrew, featuring high positioning accuracy without backlash problem.
INNOSERV FA INC. TAIWAN BRANCH (BVI)
製品の説明 :
Micro Dynamics Vertical Machining Center Line opens a new era in multi-purpose and versatile machining centers. Compact, durable, powerful, strong and accurate, the MEGA/TERA Series starts a revolution in the market: the smallest C-frame machines provide powerful and precise results for manufacturers of dies and molds, aerospace, automotive, semi-conductor, job shops and general machine sectors.
The MEGA/TERA Series has been designed with the latest in technology being utilized throughout the machine with productivity in mind. From its EtherNet/IP architecture for easy automation and integration into systems and cells, to its Motion Control for fast and smooth operations used in all industries, the MEGA/TERA Series has quickly become one of the industries leading machine tool lines of Vertical Machining Centers.
The MEGA/TERA Series has been refined through years of research and development of new technologies that greatly enhance the machines for the rigors of the Mold and Die industry.
All series are equipped with
■ 15,000 rpm Built-In Spindle
■ Thermal Compensation (DYPEC)
■ Micro Dynamics HMI
YIDA PRECISION MACHINERY CO., LTD.
製品の説明 :
The five-axis machining centers is suitable for high-efficiency, high-precision complex curved surface processing.
The characteristics of precise processing of complex workpieces and diversified manufacturing needs can be completed by fixing them in one setup.
The MV-500 shortens production working hours, improved the processing accuracy of complex parts to meet diversified needs, greatly saves on mold costs, and improves production efficiency and market competition.
