展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
CHIEN CHENS MACHINERY CO., LTD.
製品の説明 :
Specification
Table size: 2600 x 650 mm
Longitudinal travel: 2400 mm
Cross travel: 800 mm
Y slide way width: 1980 mm
Z Slide high: MAX 800 mm
Z Slide way width: 500 mm
Spindle taper: NT#50(BT)
Spindle motor: 7.5HP / 4P
Spindle speed: 70~1200 RPM
Feeding speed: 10~6000 mm/min
Ballscrew: Ø40 mm P=8 C3
Net weight: 6800 kgs
SGCAM TECHNOLOGY CO., LTD.
製品の説明 :
主功能介紹：<br />
全中文畫面，易學、易懂、易用，為加工業最適合的加工軟體，操作軟體完全不用背指令。<br />
可由AutoCAD製圖畫出工件外形，再匯入DXF圖檔，轉換為CNC程式碼。<br />
參數式的加工資料設定，作CAM只需三個步驟：（1）選擇工法（2）指定加工參數（3）計算、轉出加工G碼。<br />
參數式的資料設定，圖形改變後，加工碼會自動隨之改變。<br />
智慧型功能：<br />
工法和加工的輪廓可直接複製修改，不必再重新指定。<br />
自動清角可自動清除前一把刀具，所留下來的角落殘料。<br />
鑽孔時依據孔徑大小，自動搜尋鑽孔的加工位置，不必每一孔都去點選指定。<br />
字型可自動截割輪廓外圍不用慢慢編修。<br />
支援單筆劃字型刻字。<br />
加工路徑最佳化，各加工路徑間依最短距離自動計算，且可指定各加工路徑間不提刀以縮短加工時間，達到最佳之加工效率。<br />
立體加工： 不必畫3D曲面圖形就可做出立體加工工法，簡單夾治具可自行製作。<br />
牽引面加工：可加工彎管、簡單的立體。<br />
規則面加工：規則斜面、四角錐面、圓錐面。<br />
旋轉面加工：圓球面、葫蘆形狀。<br />
Z軸投影加工：可在不等高的平面上作投影加工。
CHIEN CHENS MACHINERY CO., LTD.
製品の説明 :
Specification
Table size: 1515 x 470 mm
Longitudinal travel: 1300 mm
Cross travel: 600 mm
Y slide way width: 720 mm
Z Slide high: MAX 810 mm
Z Slide way width: 420 mm
Spindle taper: NT#40(BT)
Spindle motor: 5HP / 4P
Spindle speed: 70~3600 RPM
Feeding speed: 10~6000 mm/min
Ballscrew: Ø32 mm C5
Net weight: 3500 kgs
HC FENG CO., LTD.
製品の説明 :
4 in 1 Coolant Purification System
1. Filtering floating debris and dirty particles
2. Oil/Water Separation, removes tramp oil down to 5% water content
3. Ozone Disinfection, eliminates bacteria and cleaned fluid backflow
4. Automatic control panel and pH detect device
SPINDLEX TECHNOLOGIES CO., LTD.
製品の説明 :
Spindle housing diameter ： 210mm
Tool interface ： HSK-A63
Maximum speed (rpm) ： 20,000 RPM
Lubrication ： Oil-Air
Motor power ： 18/22.5 KW
HEIDENHAIN CO., LTD. (TAIWAN)
製品の説明 :
Angle encoders for rotary and tilting axes are indispensable for machine tools on which high positioning accuracy and a high machining rate are essential. Because angle encoder measure angular motion of the axis directly and immediately. Mechanical transfer elements therefore have no influence on position measurement, both kinematics errors and the influences of forces are measured by the angle encoder and considered in the position control loop. This can eliminate a number of potential error sources: Gear errors, reversal error, errors due to deformation of the drive mechanics by machining forces.
LEADWELL CNC MACHINES MFG., CORP.
製品の説明 :
The 5 axes simultaneous processing, can reduce the times of workpiece unloading and the requirement of the jigs, shorten the processing time and improve performance. C-axis table using the DD motor provides high torque and rigidity and can solve the traditional worm gear backlash and worn problems. High torque and efficiency of the spindle with a complete high-rigidity structure applied results in roughing to finishing can be completed on the same machine, suitable for machining hard materials and non-ferrous materials processing.
X-axis travel: 1300mm
Y-axis travel: 610mm
Z-axis travel: 610/750mm
Table size: 1480x610mm
Max. table load: 1600kg
Spindle speed: 12000rpm
C-axis speed: 800rpm
X/Y/Z-axis rapid traverse: 36/36/30 m/min
Tool storage capacity: 30T
REN AN INFORMATION TECHNOLOGY CO., LTD.
製品の説明 :
RenAn's operation simulation workstation is a physical simulation with 3D graphic, showing the cutting and machining process.
[Save consumable cost]: There is no need to worry about the expenditure of consumables, and it will not be affected by pollutants such as waste materials and oil and gas.
[Safety]: Advanced 3D simulation and CNC virtual machine make high risk CNC operation without any danger.
[Smart learning]: Like training the pilot using flight simulators, we use CNC simulator to train the students or operators to be the machinist. Its industrial panel remains the same functionality as real machine that students can practice constantly to accumulate hands-on operation skills.
The controller series of simulator: Fanuc, Siemens, Heidenhain and Mitsubishi.
Turning, Milling, TurnMill, 4 axis, 5 axis.
YEONG CHIN MACHINERY INDUSTRIES CO., LTD.
製品の説明 :
￭ The unique IDD spindle design provides power, speed, and stiffness required for the most adverse machining applications while providing long spindle life.
￭ Ceramic bearings help to minimize heat and provide thermal stability improving overall machining accuracy.
￭ High precision rotary encoders in the B and C
axes as a standard feature, allowing for the most demanding machining accuracies.
￭ ø650 mm table provides stable machining performance with a wide machining area and trunnion support.
BUFFALO MACHINERY CO., LTD.
製品の説明 :
The AXILE G8’s powerful gantry design perfectly balances rigidity and precision, ideal for the machining of complex workpieces.
With a maximum loading capacity up to 1,300 kg on a swiveling, rotary table, complemented by high-performance built-in spindles, the G8's agility enables production of a wide range of large parts and tools.
The G8 MT option offers both milling and turning in one machine, greatly increasing operational flexibility. By reducing set-up times and potential clamping errors, the G8 MT can efficiently machine a wider variety of parts, including cylindrical components.
