展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
CLAMPTEK ENTERPRISE CO., LTD.
製品の説明 :
Clamptek’s CLKA series is using the optimal designation, so the clamping capacity is higher than other cylinders. The cylinder body and the fulcrum are integrated structured. Therefore, the cylinder’s size is smaller and it’s more solid and firm.
Clamptek’s CLKA series uses special dust seals to ensure the high dust proof and high sealing performance. As for the lower flange part, which uses minimized designation, it’s suitable for the compact and light fixture.
If you have any customized requests, please feel free to contact us.
Please kindly check the suggested operating pressure as below,
Max. operating pressure: 70 kgf/cm2
Min. operating pressure: 10 kgf/cm2
TAI CHONG CO., LTD.
製品の説明 :
用途： CNC切削中心機，銑床，龍門銑床，電腦銑床等切削作業。<br />
特性：<br />
本體與面板一體成型加工完成。<br />
以電控操作，快速充脫磁場變換。<br />
以永久磁鐵吸著工件，沒有停電的危險性。<br />
吸磁作業面，螺栓孔可應用於模具及固定方式的變化。<br />
可配合彈性導磁塊，針對變形平面，作平面加工，大量節省調整時間，提高工作效率。<br />
結構剛性佳，配合精度穩定，適合高精度加工作業。<br />
與強力型電磁鐵比較，大幅度節省電力消耗。<br />
防水效果最確實，保證不漏水，不漏電。<br />
平均吸磁力18kgf/cm2以上。
CLAMPTEK ENTERPRISE CO., LTD.
製品の説明 :
The Thread-body single acting hydraulic cylinder use imported oil seal and accessories to guarantee the quality. No oil leakage while clamping in high pressure for a long time. The volume of the thread-body single acting hydraulic cylinder is small. It can be utilized in a small space in the fixture.
This hydraulic cylinder is used to extend out, and when spring returns, but it can't be used for pulling back.
The angle degree between the cylinder and workpiece could not be larger than 10° while installing.
The bottom of the cylinder barrel needs a leakage-proof gasket.
Max. operating pressure: 250 kgf/cm²
Min. operating pressure: 20 kgf/cm²
Single acting
Usable fluid:
Taiwan TeamA Tech. Co., Ltd.
製品の説明 :
formlabs 熱銷光固化機種 Form 3+/3B+ 搭載專利研發「低應力光固化成型技術（LFS）」，其特色包含彈性樹脂槽與封閉式光學模組（LPU）等，雷射光可垂直照射到物件，大幅增加機器的可靠與穩定性，可印出高精確度、平滑度及透度更佳的高品質物件，桌面級的機種，也能達到工業級的效果。
搭配上為 Form 3+/3B+ 量身打造的後處理設備－自動清洗機 Form Wash 及恆溫光固機 Form Cure，提供完整、快速的 3D 列印製造流程。
Form 3+ 六大特色包括：
1. 前所未有的表面精細度
2. 極平滑的物件表面與透度
3. 彈性樹脂槽使成功率大增
4. 遠端列印超easy
5. 無與倫比的30多種多元樹脂材料
6. 輕觸支撐材帶來最佳效率
