展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
CLAMPTEK ENTERPRISE CO., LTD.
製品の説明 :
＊High supporting force
CSP-P/ CSP-K increases the holding force between the piston rod and the inner jacket to arise the higher supporting force.
＊Coolant cleaning measures
In order to prevent the malfunction from the intrusion of high-pressure coolant and the cutting dust entering the internal structure, air can be cleaned at the breathing port when replacing the workpiece. Air cleaning requires a dedicated air circuit. (recommended cleaning pressure is 0.3 - 0.5MPa).
＊Universal piping base
CSP-P/ CSP-K piping base is interchangeable, which can be installed with other low-pressure cylinders in the same specifications.
Taiwan TeamA Tech. Co., Ltd.
製品の説明 :
Form 3L為 Formlabs 推出的大型光固化3D列印機，是一款成型空間達擁有達33.5*20*30cm的桌面級3D列印機，讓您的想像力不受限！採用最新專利研發的低應力光固化成型技術（LFS），擁有彈性樹脂槽與封閉式光學模組（LPU）等，大幅增加了機器的可靠與穩定性，精確度、平滑度及透度都大大增加，讓您的大物件也擁有精緻細節！搭配Form Wash L自動清洗機與Form Cure L溫控光固機，以磁力迴旋可一次清洗一個Form 3L平台或是兩個Form 3平台，並使用兩個500W加熱器與大功率紫外線燈全方位高度強化，發揮材料最佳性能！
Form 3L特色包含
1. 33.5*20*30cm 超大列印空間
2. 大型物件也有大大的細緻度
3. 彈性成型槽印大型實心物件也不怕
4. 專利LFS技術配合光學模組使透度平滑度大幅提升
5. 雙卡匣智能給料，安心列印不中斷
6. 高達20多種樹脂滿足外觀、功能驗證需求
7. 輕觸支撐材，好拆不麻煩
8. 繁體中文切片軟體PreForm超好用
CLAMPTEK ENTERPRISE CO., LTD.
製品の説明 :
The Thread-body single acting hydraulic cylinder use imported oil seal and accessories to guarantee the quality. No oil leakage while clamping in high pressure for a long time. The volume of the thread-body single acting hydraulic cylinder is small. It can be utilized in a small space in the fixture.
This hydraulic cylinder is used to extend out, and when spring returns, but it can't be used for pulling back.
The angle degree between the cylinder and workpiece could not be larger than 10° while installing.
The bottom of the cylinder barrel needs a leakage-proof gasket.
Max. operating pressure: 250 kgf/cm²
Min. operating pressure: 20 kgf/cm²
Single acting
Usable fluid:
YOKE INDUSTRIAL CORP
製品の説明 :
1. Size from M8 to M90 to fulfill your demand
(M8 ※ 0.3t _ M90 ※ 40t)
2. Design Factor 4:1, Working load limit could be up to 40 tons
3. Lifting point is made by forged alloy steel, quenched and tempered
4. Suitable for all loads which swivel and tilt especially for heavy duty, material handling, mold & die industries.
5. Ball bearing inside is easier for flipping working piece and rotation.
6. Light weight, High Performance, easily for using
7. Deliver with test certification to guarantee your safety
Taiwan TeamA Tech. Co., Ltd.
製品の説明 :
formlabs 熱銷光固化機種 Form 3+/3B+ 搭載專利研發「低應力光固化成型技術（LFS）」，其特色包含彈性樹脂槽與封閉式光學模組（LPU）等，雷射光可垂直照射到物件，大幅增加機器的可靠與穩定性，可印出高精確度、平滑度及透度更佳的高品質物件，桌面級的機種，也能達到工業級的效果。
搭配上為 Form 3+/3B+ 量身打造的後處理設備－自動清洗機 Form Wash 及恆溫光固機 Form Cure，提供完整、快速的 3D 列印製造流程。
Form 3+ 六大特色包括：
1. 前所未有的表面精細度
2. 極平滑的物件表面與透度
3. 彈性樹脂槽使成功率大增
4. 遠端列印超easy
5. 無與倫比的30多種多元樹脂材料
6. 輕觸支撐材帶來最佳效率
