展览主题
数位转型
绿色转型
向揚工業有限公司
产品描述 :
轉子壓縮系統
100%德國原裝進口，為確保空壓機運轉品質，以及穩定的出氣流量，我們採用德國高精密度的轉子，性能穩定、品質優異，而且更是堅固耐用。
向揚工業持續不斷地研發與創新，我們的產品在各方面與時俱進，公司經營目標為最有競爭力的品牌，專業、精緻、設計有足夠的彈性與機動力來接受市場的一切挑戰，客製化是我們的標準程序，把握每次為企業再造注入新的契機與活力的機會，在日新月異的競爭時代，唯一堅持不變的信念：
品質就是力量！
向揚工業有限公司
产品描述 :
PM MOTOR
強大的驅動核心，更節能、更省電
最高能效等級d=30
永磁變頻空壓機最大的優點就是節能，一般可節能 10%~35%，節能的多少決定於空壓機的工作狀況和變頻器的的設定，當客戶的用氣狀況起伏越大，節能的效果就越好。採用高效節能的控制系統，空壓機啟動減少了對電機及電氣元件的衝擊，啟動電流小，也延長了馬達的壽命，相對也減少對設備機械的衝擊。
向揚工業有限公司
产品描述 :
2 STAGE ROTARY SCREW
強大的二級壓縮效能，超越一級壓縮
最高能效等級d=30
一直以來，我們的設計及製造技術，就是品質的最佳保證，這系列新的設計，我們運用兩段式 2 級壓縮的效能，製造出最高能效的空壓機，讓流量、耗電及溫度，都保持在最佳狀態，使螺旋式空壓機，更節能，更省電，更符合您的使用，不但大幅提高您的生產效率，也大幅節省用電量上的耗損。
輝寶實業有限公司
产品描述 :
輝寶的風管產品包含了PU管、PU夾紗管和尼龍管。我們還可提供氣動快速接頭、轉接頭、彈簧和保護套讓客戶搭配。
PU管和PU夾紗管都是環保材質。PU夾紗管的耐壓還可高達200psi, 而尼龍管則是重量輕且可耐高低溫。
銣佳科技有限公司
产品描述 :
氣動電熱剪是一種利用刀片的電阻，通過大電流來實現雙刀刃發熱的電熱刀，其預熱時間短，只要幾秒鐘刀片就能夠達到紅熱的狀態，產品採用的是雙軸氣缸，壓力範圍0.15～1Mpa，刀刃為雙刃採用工具鋼特殊熱處理，上下刀座各一加熱棒（ψ8mmx35mm)，其加熱功率150W、溫度範圍為60～350℃，藉由雙軸氣汽缸前進搭配刀刃溫度控制器的設定達到穩定的剪切效果，因此其效率甚高（直接用刀片發熱，損耗小），剪切速度快，可以根據不同的塑膠材料以及場合選擇不同的溫度，搭載在機械手臂或自動化生產線上，其適用範圍廣，可用於切割汽車車燈、壓克力、光學鏡頭、PC塑料等。而氣動電熱剪主要作動來源於氣壓，由於氣壓所產生的壓力遠遠大於人的手產生的壓力，所以能夠在剪切物品的時候，變得非常的容易。
HYDROKOMP GmbH
产品描述 :
Coupling elements of HYDROKOMP are made of stainless materials. This enables the elements to be used for all fluids and gases that are not aggressive. Special designs eg. for water steam or other media are available on request. HYDROKOMP offers coupling elements for two different operating modes depressurized coupling or pressurized coupling. The elements for depressurized coupling can be coupled pressurized up to 25 bar, if the specified volume flow is not be exceeded. When using higher operating pressure there ockures a risk of demaging the soft seal in the check valve as the result of high flow velocities of the fluid. This means for coupling of air up to 10 bar there should be always used the coupling elements for depressurized coupling. This also applies when the coupling process is initiated pressurized. The elements which can be coupled pressurized may be coupled up to the maximum specified operating pressure on one side and / or on both sides.
HYDROKOMP GmbH
产品描述 :
The rotary lever clamp is especially suited for clamping fixtures with only little space for the installation of clamping elements. Its construction and compact design allows flexible solutions at various installation conditions. HYDROKOMP offers hydraulic rotary lever clamps which are single-acting as well double-acting. They are used in clamping fixtures whose oil supply is made through drilled channels. To swing down the clamping arm, the linear motion is used pro rata which clamps the workpiece. To unclamp, the clamping arm swings back to where the workpiece can be safely taken out.
HYDROKOMP GmbH
产品描述 :
Swing clamp cylinders release the clamping point on the workpiece. With this, it is easy to change the workpiece. This hydraulic swing clamp cylinder operates as single-acting or double-acting traction cylinder, whereas part of the stroke is used to rotate the piston. The model with 0° swing angle operates only vertical as traction cylinder.
To guarantee a long lifetime the cylinders have an integrated metal wiper as standard. For oil supply, the cylinders are equipped with threaded port and manifold port with O-ring for drilled channels. You can select between right or left turning models with various standardized swing angles. The integrated overload protection protects the swing mechanism from damage due blockage of the rotation or improper assembly of the clamping arm.
For any risk of exceeding the permitted volume flow a throttle check valve must be interposed into the oil supply line. Counter-hold the clamping arm when tightening or loosening the counter nut in order to prevent torque transfer to the piston rod and to avoid damage to the ball guide. Variations with 0°, 30°, 45°, 60° and 90° swing angles are available. The permitted operating pressure is depending from the clamping arm length.
