展览主题
数位转型
绿色转型
HYDROKOMP GmbH
产品描述 :
The rotary lever clamp is especially suited for clamping fixtures with only little space for the installation of clamping elements. Its construction and compact design allows flexible solutions at various installation conditions. HYDROKOMP offers hydraulic rotary lever clamps which are single-acting as well double-acting. They are used in clamping fixtures whose oil supply is made through drilled channels. To swing down the clamping arm, the linear motion is used pro rata which clamps the workpiece. To unclamp, the clamping arm swings back to where the workpiece can be safely taken out.
HYDROKOMP GmbH
产品描述 :
Coupling elements of HYDROKOMP are made of stainless materials. This enables the elements to be used for all fluids and gases that are not aggressive. Special designs eg. for water steam or other media are available on request. HYDROKOMP offers coupling elements for two different operating modes depressurized coupling or pressurized coupling. The elements for depressurized coupling can be coupled pressurized up to 25 bar, if the specified volume flow is not be exceeded. When using higher operating pressure there ockures a risk of demaging the soft seal in the check valve as the result of high flow velocities of the fluid. This means for coupling of air up to 10 bar there should be always used the coupling elements for depressurized coupling. This also applies when the coupling process is initiated pressurized. The elements which can be coupled pressurized may be coupled up to the maximum specified operating pressure on one side and / or on both sides.
銣佳科技有限公司
产品描述 :
氣動電熱剪是一種利用刀片的電阻，通過大電流來實現雙刀刃發熱的電熱刀，其預熱時間短，只要幾秒鐘刀片就能夠達到紅熱的狀態，產品採用的是雙軸氣缸，壓力範圍0.15～1Mpa，刀刃為雙刃採用工具鋼特殊熱處理，上下刀座各一加熱棒（ψ8mmx35mm)，其加熱功率150W、溫度範圍為60～350℃，藉由雙軸氣汽缸前進搭配刀刃溫度控制器的設定達到穩定的剪切效果，因此其效率甚高（直接用刀片發熱，損耗小），剪切速度快，可以根據不同的塑膠材料以及場合選擇不同的溫度，搭載在機械手臂或自動化生產線上，其適用範圍廣，可用於切割汽車車燈、壓克力、光學鏡頭、PC塑料等。而氣動電熱剪主要作動來源於氣壓，由於氣壓所產生的壓力遠遠大於人的手產生的壓力，所以能夠在剪切物品的時候，變得非常的容易。
培凱有限公司
产品描述 :
HiPerSeal®是一種U型鐵氟龍內裝特殊彈簧的高性能彈簧密封件，俗稱彈簧油封或彈簧致動油封。鐵氟龍彈簧油封是由適當的彈簧力加上系統流體壓力，將密封唇(面)頂出而輕輕壓住被密封的金屬面以產生優異密封的效果。彈簧的致動效應可以克服金屬配合面的輕微偏心以及密封唇的磨耗，而持續保有預期的密封性能。它能利用各種特殊彈簧來克服鐵氟龍或其他高性能橡膠塑料的彈性問題，開發出可取代絕大數應用於靜態或動態（往復或旋轉運動）的密封件。而彈簧可因應不同的使用環境，選用不鏽鋼、Elgiloy®、Hastelloy® 等，故可應用於各種高溫腐蝕流體的場合。我們提供廣泛的彈簧選擇，其中包含斜圈彈簧(C型彈簧 - Canted Coil Spring)、螺旋彈簧(H型彈簧 - Helical Spring)、懸臂彈簧(V型彈簧 - Cantilever Spring)。
