展览主题
数位转型
绿色转型
銣佳科技有限公司
产品描述 :
氣動電熱剪是一種利用刀片的電阻，通過大電流來實現雙刀刃發熱的電熱刀，其預熱時間短，只要幾秒鐘刀片就能夠達到紅熱的狀態，產品採用的是雙軸氣缸，壓力範圍0.15～1Mpa，刀刃為雙刃採用工具鋼特殊熱處理，上下刀座各一加熱棒（ψ8mmx35mm)，其加熱功率150W、溫度範圍為60～350℃，藉由雙軸氣汽缸前進搭配刀刃溫度控制器的設定達到穩定的剪切效果，因此其效率甚高（直接用刀片發熱，損耗小），剪切速度快，可以根據不同的塑膠材料以及場合選擇不同的溫度，搭載在機械手臂或自動化生產線上，其適用範圍廣，可用於切割汽車車燈、壓克力、光學鏡頭、PC塑料等。而氣動電熱剪主要作動來源於氣壓，由於氣壓所產生的壓力遠遠大於人的手產生的壓力，所以能夠在剪切物品的時候，變得非常的容易。
HYDROKOMP GmbH
产品描述 :
Coupling elements of HYDROKOMP are made of stainless materials. This enables the elements to be used for all fluids and gases that are not aggressive. Special designs eg. for water steam or other media are available on request. HYDROKOMP offers coupling elements for two different operating modes depressurized coupling or pressurized coupling. The elements for depressurized coupling can be coupled pressurized up to 25 bar, if the specified volume flow is not be exceeded. When using higher operating pressure there ockures a risk of demaging the soft seal in the check valve as the result of high flow velocities of the fluid. This means for coupling of air up to 10 bar there should be always used the coupling elements for depressurized coupling. This also applies when the coupling process is initiated pressurized. The elements which can be coupled pressurized may be coupled up to the maximum specified operating pressure on one side and / or on both sides.
彰化振榮油機股份有限公司
产品描述 :
1. 特點是「油量固定」，亦即每個潤滑點可獲得同樣的潤滑油量。
2. T型分配器有多種吐出量可供選擇: 0.1cc、0.2cc、0.3cc、0.4cc、0.5cc，訂購時請先告知孔數與每孔預定之吐出量。
3. 每個出油孔均有檢知棒，具檢知功能，可目視動作是否異常，如再選搭微動開關，可於動作或間歇時產生訊號，更容易觀察動作狀態。
4. T型分配器每次動作時均將潤滑油儲存於分配器管內，而每次間歇時注油。
5. T型分配器0.5cc可加裝微動開關裝置，客戶可自行設定為NO(常開)或NC(常閉)，亦可兩者皆設定。設定為NO常開時，會於每次動作儲油時產生訊號，設定為NC常閉，則會每次間歇注油時產生訊號。
6. 須搭配脫壓式機油注油機使用，最低啟動壓力則為8kgf/c㎡，最高工作壓力為30kgf/c㎡。
7. 使用油品之黏度範圍:機油32-90 cSt@40℃。
HYDROKOMP GmbH
产品描述 :
The rotary lever clamp is especially suited for clamping fixtures with only little space for the installation of clamping elements. Its construction and compact design allows flexible solutions at various installation conditions. HYDROKOMP offers hydraulic rotary lever clamps which are single-acting as well double-acting. They are used in clamping fixtures whose oil supply is made through drilled channels. To swing down the clamping arm, the linear motion is used pro rata which clamps the workpiece. To unclamp, the clamping arm swings back to where the workpiece can be safely taken out.
