Theme
Digital Transformation
Green Transformation
TONGTAI MACHINE & TOOL CO., LTD.
Product Description :
‧The VP-12 combines the advantage of a smaller footprint with a large internal machining space, equipped with a high-speed spindle to meet the requirements of efficient and precise machining.
‧Direct-drive spindle BBT-40 provides a high rigidity and high efficiency.
‧The tool magazine allows for flexible tool placement and pre-selection, coupled with a high-speed ATC mechanism to reduce non-cutting time, showcasing efficiency similar to drilling and tapping machining centers.
‧High quality spindle and high rigidity structure design subject to high standards of machine accuracy to achieve good cutting performance.
‧By Tongtai production system, we check every detail process from design, manufacturing, assembly and QC.
SONG GIA INDUSTRIAL CO., LTD.
Product Description :
【CROSS DRILLING/MILLING UNIT, 3-SPINDLE】
Speed ratio : 1:1
Maximum speed : 8000RPM
Tool clamping : ER11M
【DRILLING/MILLING UNIT FOR SUB SPINDLE】
Speed ratio : 1:1
Maximum speed : 8000RPM
Tool clamping : ER11
Machine :
33mm : SR-20R : STRB111203
36mm : SB-20R : STBB111201
47mm : SR-32J : STRB111301
HONG JI PRECISION MACHINERY LTD.
Product Description :
Drilling capacity is from Ø5mm to Ø40mm and the max. drilling length is 3000mm
The machine is suitable for drilling accessories of petroleum system, tube holes of heat-exchangers, long mechanical sleeves and long aerospace parts.
Slideways of all axis are harden box ways with heat-treatment to HRC52, this design has good damping to absorb vibration as drilling big and long holes.
The worktable is loaded on the harden box slideways with width 200mm. The max. loading weight on the worktable is 20tons.
The width of column is 2 meters with two sub-columns to provide the excellent support to Y-axis as moving up and down. Total weight of the machine is about 38tons.
CHING HSYANG MACHINERY INDUSTRY CO., LTD
Product Description :
1. This machine is designed for internal and external shaving of round
tubes.
2. The center line of the processed object and the insert head is accurate.
3. The clamping die and the insert head are designed to be uniform, and
the work piece can be processed uniformly at one time.
4. The insert head is specially designed, the blade is standardized, and the
adjustment tool is simple and fast.
5. Feeding by manual, automatic advance and retreat blade, fast speed,
suitable for material steel pipe, iron pipe, aluminum pipe, copper pipe,
stainless steel pipe, plastic pipe, non-metal material and carbon fiber
pipe.
6. The machine is randomly matched with the multiple clamp, which can
be applied to different pipe diameters, saving time and cost for
replacing the clamp.
YOKE INDUSTRIAL CORP
Product Description :
1. 360° rotation and 230°pivot
2.Rotatable under load due to its unique ball bearing design.
3.Manufactured in accordance with EN1677‐1 and the requirements of ASME B30.26
4.Certified by DGUV GS‐OA‐15‐04
5. Forged alloy steel, quenched and tempered
6.With the Grade 100 High‐strength alloy steel, WLL is increased without increasing swivel size compared to other Yellow Point models.
7.4:1 Design factor
8.100% Magnaflux crack detected
9.Proof load at 2.5 times the WLL
10.Fatigue rated for 20,000 cycles at 1.5 times the WLL
TSYR TZUN INDUSTRIAL CO., LTD.
Product Description :
1.With circuit protection of breaking for motor, once any wire of three phases power source is broken off, this unit could cut off current to motor to prevent motor from being burn out.
2. Drill sleeves、tapping adaptors and borer holder are with rapid adaptors, very convenient for replacement of cutters.
3.Tapping adaptors with torsion control, tap bits are protected from being twisted off.
4.MTM-932ADL comes with drilling force control unit for Auto-feeding:
When drill bit is worn out, this unit will drive feeding intermittently or stop feeding.
Once feeding becomes difficult while making a hole, Please replace a new drill bit or re-sharpen the worn out one in order to protect both drilling tool and machine body from being damaged.
5. MTM-932ADL comes with three intermittent breaking rates for breaking chips :
Choose different feeding rates according to different drill bits and material to perform Auto-feeding operation.
This device can break chips intermittently and discharge them while Auto-feeding is processing, so that chips would not roll on drill bit. Easier to discharge chips.
6. MTM-932ADL comes with three feeding rates for Auto-feeding:
Feeding rates are separately 0, 0.15 and 0.25, please choose suitable rate according to size of drill bit and material of work-piece for drilling.
7. The rotation speed of the MTM-932ADL can be changed quickly during running.
It's very convenient for the operator, and the efficiency is increased accordingly.
HAI JU TRADING CO., LTD.
Product Description :
螺紋護套, 是一種高強度的緊固件, 能在低強度的材料中提供高強度的緊固功能，螺紋護套已經在市場上發行約超過60年, 這些不銹鋼螺紋護套是以菱形輪廓的鋼線製成彈性螺旋, 並且經過質量驗證。護套安裝後，在導舌預定斷裂點折斷導舌，以使螺紋護套通孔.<br />
<br />
<br />
<br />
由於不斷的改良與優化，HELICOIL®Plus 螺紋護套 現在更容易安裝。<br />
<br />
與HELICOIL®經典螺紋護套做比較, HELICOIL®Plus的線圈有特殊的起始， HELICOIL®Plus同樣是以菱形輪廓的鋼線製成的彈性螺旋, 於由線圈有特殊的起始, 安裝時可以像螺絲一樣被定位並擰入, 搭配現有的同一公稱系列工具組裝，與HELICOIL®經典螺紋護套的安裝做比較, 能縮短將近20％的安裝時間. <br />
<br />
<br />
<br />
HELICOIL®Plus 提供高強力, 能從側面到側面, 將力傳遞到螺紋。<br />
<br />
這種高度可靠性的系統已被德國和國際工業產權提交。 HELICOIL®Plus根據一致性的材料和質量規範生產螺紋護套, 並滿足國家標準化以及航空和軍用標準的要求。 除此之外, 許多領先的大型用戶亦以HELICOIL®螺紋護套為基礎做為製造標準。<br />
<br />
<br />
<br />
<br />
<br />
Rm = tensile strength 1,400 N/mm2 min.<br />
HV = vickers hardness 425 HV 0.2 min.<br />
RZ = roughness depth approx. 2.5 μm<br />
μG = reduced thread friction, results in increased preload-force FV<br />
τt = reduction in torsion stress in the screw shank<br />
===========================================================<br />
<br />
HELICOIL®無尾螺紋護套<br />
<br />
1.無折斷,無斷裂<br />
-無風險的留在組件<br />
-減少安裝時間<br />
-減少測試時間<br />
<br />
2.降低刀具磨損<br />
-工具刀片的磨損最小<br />
-易於維護<br />
<br />
3.提高品質<br />
-簡單化的品量保證<br />
-高強度的配合螺紋盲孔深度或預裝配組件<br />
-符合NA0276標準
