Theme
Digital Transformation
Green Transformation
SHARPMAX TOOL INC.
Product Description :
● Periodic cutting stree is effectively suppressed by
continuously changing outer teeth spacing,allowing
for chattering control.
● Excellent anti-vibration performance compatible in a
wide variety of milling for exotic alloys including
SUS,inconel,and Titanium.
● Reduces chattering for high-speed and high-feed
cutting.
● Ultra-smooth coating with significantly
improvedcoating hardness and heat resistance
improves tool live in heat resisitive ally maching.
DI KU DIAMOND ENTERPRISES CO., LTD
Product Description :
PCD Mill with Multiple Cutting Edges: The Expert Tool for Hard and Brittle Materials in the Semiconductor Industry
DI KU DIAMOND proudly presents a professional cutting tool designed specifically for the semiconductor industry—the PCD Mill with Multiple Cutting Edges.
Thanks to its unique multiple cutting edges design and the PCD (Polycrystalline Diamond) material on its front cutting edge, this end mill demonstrates outstanding performance when machining hard and brittle materials.
JIN LI CHENG CUTTING TOOL CO., LTD.
Product Description :
※Special chip out and geometric flute design. Excellent chip out perfomance without burrs. For various materials including the ductile stainless steel.
※Multinational patented drill point angle and double ute design. Great wear out resistance Keep long time precise drilling.
※With both function of Drill and Reamer design and its accuracy tolerance is within 0.01mm. It also can save tool change time while processing.
※With European carbide round bar and exclusive cutting angle design, We run the polish process on all the end mills, and it leads the tools easy to remove chips and keep the double life time than other competitors.
※Based on Europe composite coating with internal coolant holes, it leads the JLC at drill much longer life time and reduce customer lots of processing cost.
NINE-9 CUTTING TOOLS CO., LTD.
Product Description :
The “ i-Center ” is a trademark of Nine9,
the developer of the first indexable center drill in the world.(Patented)
Offering an indexable insert system for the 1st time, Nine9’s “i-Center ” design improves your process performance. Shortens set up and center drilling time.Increases tool life and reduces tooling costs.
● High Speed, High Feed Rate
• The special ground insert and rigid holder design facilitate high performance speed and feed rates. For example, drilling alloy steel
at 6000 rpm and feed rate of 600 mm/min. (0.1 mm/rev.).
● Excellent Repeatability
• The positioning repeatability of the insert is within 0.02 mm
(.0008”) in radial direction, thus ensuring conformity to any national
standards.
● Easy Tool Length Setting
• The axial position accuracy of the insert is 0.05 mm (.002”). It is
not necessary to reset the tool length when changing or cutting edge.
● Extended Tool Life
• Coolant can be supplied through the center of the holder to increase performance and extend tool life.
• Insert geometry, grades and coating process are specifically engineered for centering applications.
Fey Che Trading Co., LTD.
Product Description :
MUGEN COATING PREMIUM Plus具有高抗氧化性和耐磨性，適用於 60HCR 以上的加工。即使在 45~60HRC的加工中也能表現出與 MUGEN COATING PREMIUM 相同的性能。____________________________________________________________
[ 方 頭 銑 刀 ]
[ 型號 : MHDSH445・MHDSH645 ]
*刃長有2D與3D型式可供選擇
*採用最新開發之白金級PLUS無限鍍膜，最適合加工45~70HRC之高硬度鋼材
*高剛性設計實現高精度加工____________________________________________________________
[ 球 頭 立 銑 刀 ]
[ 型號 : MSBSH330-5X ]
*採用耐崩損性佳的新素材及銳角刃口設計，可以減輕切削抵抗
*採用不等分割設計，可以防止震刀
*5軸機專用圓球立銑刀
[ 型號 : MRBSH330 ]
*最優化中心刃形狀、 能進行高切削深的高效率
*加工即使在45〜70HRC高硬度鋼，兼具切削性與
*耐磨耗性，能實現長壽命、高效率的加工
[ 型號 : MRBSH230SF ]
*加工70HRC的高硬度鋼材，也能實現長壽命及穩定的加工性能
*採用耐崩損的新素材及減低切削抵抗的刃口設計____________________________________________________________
[ 端 角 R 立 銑 刀 ]
[ 型號 : MHRSH430RSF ]
*全新的修光刃設計可提升平面加工表面品質
*R角無段差設計，提升側面加工表面品質
*高剛性設計實現高精度加工
CHAIN HEADWAY CO., LTD
Product Description :
Precision Groove Cutting × Rigidity Enhancement × Stable Deep Cutting — The Right Way to Use a Side Milling Cutter
Professional machining isn’t about luck or experience — it’s about precision in every cut.
Chain Headway’s Side Milling Cutter Series helps you achieve precise results from every side of your workpiece!
🛠 Why is the side milling cutter one of the most valued tools for technicians?
In high-rigidity, high-precision machining environments, the side milling cutter isn’t just a tool for making keyways and slots — it’s a critical factor in overall process stability.
Whether machining drainage grooves on aluminum alloy wheels, O-ring grooves on mold guide posts, or keyways on gear exteriors, any deviation in tool balance, cutting force, or chip evacuation can lead to edge chipping, poor machining quality, or even workpiece scrap.
🧰 Tool Body Design Advantages
• Finish-machined after pre-hardening to reduce runout caused by heat-treatment deformation
• Pre-centered insert seat for higher mounting precision and symmetry
• High contact ratio at the slot base to suppress micro-vibration under cutting load
• Multiple bore sizes (B22, B27, B32, B40, B50) for flexible compatibility with spindles or extension holders
TAIHO TOOL MFG. CO., LTD.
Product Description :
AE-VM features good stiffness, unequal lead and helix angle to enhance anti-vibration.
New flute design fulfills better chip removing.
New Coating “DUARISE” provides advantage on lubricity, wearability, high temperature oxidation resistance, and muti-layer structure can prevent it from thermal cracking.
Standard Type and Short Blade Type(AE-VMS、AE-VMSS):Square, Radius, and 90°(-RA) end mill.
3D, 4D Long Blade Type(AE-VML):Square, Radius, and Chip-breaking flute(AE-VML-N) end mill.
Side Milling Type(AE-VMFE): Square, and Radius end mill.
CHIN MING PRECISION TOOLS CO., LTD.
Product Description :
★ Cutting edges and workpiece reduce contact area, lower cutting resistance and boost efficiency.
★ Cutting edges distribute cutting forces evenly, reducing wear and extending tool life.
★ Minimizes vibration during machining, improving surface finish and precision.
★ For copy milling alloy steel, hardened steel (≦60°HRC), stainless steel and cast iron.
NINE-9 CUTTING TOOLS CO., LTD.
Product Description :
This is a revolutionary new concept of engraving tools with indexable carbide inserts. They offer you the ability to produce HIGH QUALITY ENGRAVING in most materials.
The latest coated carbide grades help you to obtain higher speed and feed rate, dramatically reducing your cycle time.
● High Positive Rake Angle
• Indexable insert.
• Suitable for engraving all types of materials, such as plastic, non-ferrous metal, aluminum, copper, carbon steel and stainless steel.
● Multi-Side Grinding
• Full peripherally ground insert to ensure efficient repeatability.
• It performs excellently without producing any burrs, especially in copper, aluminum and stainless steel.
● High Speed, High Feed Rate
• Designed to run at high speed, up to 40,000 r.p.m.
• Feed rate 0.08mm (0.003”) / rev. apply to aluminum; 0.05mm (0.002”) / rev. apply to stainless steel.
• Reduces engraving cycle time!
● Economical
• Each indexable insert has 2 cutting edges.
• No resharpening required. Tool length is unchanged.
• No need to reset after changing insert or cutting edge.
• Excellent repeatability!
NINE-9 CUTTING TOOLS CO., LTD.
Product Description :
Nine9 chamfer mill is designed for chamfering and countersinking with an indexable insert.
The insert is a specifically designed for use in high speed machining ; the multiple flutes
provide for increased feed rate, optimizing performance and reducing cutting time.
High performance chamfer tool for upgrading your machining process.
For front and back chamfering. Eliminates 2nd operation or deburring time.
● Excellent Repeatability
• Smallest Indexable counter sink, diameter ø7 mm.
• The insert is dual-relief angle, specially edge honning and optimized coated for high cutting speed.
• Optimized the number of teeth on the holder to achieve higher feed rate.
● Economical
• Each insert has 4 cutting edges.
• Long tool life.
● Applications
• For front and back chamfering.
• 90° counter sink and 45° chamfering.
• For counter sink, circular chamfering, contour chamfering and face milling.
CHAIN HEADWAY CO., LTD
Product Description :
The Art of Cutting — Tailored for You
PCD, CBN & Carbide Precision Inserts × Your Best Choice for Custom Machining Solutions
🎯 “It’s not about choosing our products — it’s about choosing our solutions.”
In today’s era of ultra-fast, high-precision, and high-efficiency machining, standardized inserts can no longer meet the challenges of diverse processes and materials.
Chain Headway offers more than just inserts — we deliver complete cutting solutions customized to your materials, equipment, and productivity goals.
