Product Name : Portable Electromagnetic Drill & Tapping Machine

TEL: 886-4-24067770

E-mail :

Booth No. : 2A406



1. This model can use normal straight handle drill bit or oblique handle drill bit to drill holes. And use
tap bit to tap thread. Furthermore it can also use annular cutter to cut holes.
2.The drilling capacity is from 6mm-32mm , the tapping capacity is from 10mm-30mm and the cutting
capacity is up to 110mm.
3.The up/down transmission of the tool bit is by the round shaft gear rack, so the drilled holes and the
tapped threads won’t skew to one side. The processing quality is very good and the machine body
is stable and durable too.
4.The rotation speed of the MTM-930A can be changed quickly during running. It’s very convenient
for the operator, and the efficiency is increased accordingly.
5.Drill sleeves、tapping adaptors and borer holder are all with rapid adaptors, very convenient for
replacement of cutters.
6. Tapping adaptors with torsion control, tap bits are protected from being twisted off.
7. Special desigh of tapping handle makes tapping operation easier, any time you need right
direction rotating for tapping or reverse for withdrawing just push it downward or release, even tap
on a high hardness steel, this machine can attain it's function perfectly.
8. With circuit protection of breaking for motor, once any wire of three phases power source is broken
off, this unit could cut off current to motor to prevent motor from being burn out.
9. It s most suitable for the drilling and tapping process on the heavy duty machine and the