展览主题
数位转型
绿色转型
威士頓精密工業股份有限公司
产品描述 :
■單一冷凍迴路,複數油循環迴路,精準提供獨立流量及壓力。
■ 不同液體同時溫控需求,可客製化。
■ 雙基板各別針對複數迴路進行溫度控制,並可分別獨立調整需求溫度。
■ 具溫度補償與預熱功能
■ 溫控精度±0.5℃~1.5℃(其他溫控精度可客製化)。
■ 佔地面積節省約50%
■ 採用新型高效率環保冷媒,不污染環境。
■ 整機高達95%以上材料可回收,為環保盡一份心力。
‧ 採用新型高效率環保冷媒，不汙染環境。
富達興企業有限公司
产品描述 :
德國 Hoffmann 加工冷卻過濾設備， 配備在 Reishauer. Liebherr. Klingelnberg. Kapp Niles. Gleason Pfauter... 等，富達興企業代理之德國Hoffmann 冷卻過濾機台提供設備的維護、維修、備品(過濾帶.膠條.濾紙.清潔毛刷)。
輝寶實業有限公司
产品描述 :
輝寶的風管產品包含了PU管、PU夾紗管和尼龍管。我們還可提供氣動快速接頭、轉接頭、彈簧和保護套讓客戶搭配。
PU管和PU夾紗管都是環保材質。PU夾紗管的耐壓還可高達200psi, 而尼龍管則是重量輕且可耐高低溫。
得雲精密工業有限公司
产品描述 :
得雲精密工業有限公司致力於空調設備、冷凍設備、控制箱熱交換器、水冷卻機、空調冷卻機、水冷卻機附水箱、油冷卻機、熱交換式冰水機、切削液專用循環式油冷卻機、放電加工機專用油冷卻機、切削液專用油冷卻機等產品生產製造及服務。
得雲生產的冷卻系統，能讓工作母機或產業機械得到最有效的控制溫度、及濕度等，並延長控制元件的使用壽命，進而使機械充分發揮其精度、穩定度及提升生產產品的品質。
以最專業的設計，最佳規劃，讓得雲的產品為機械的守護者，最長保固期與最佳售後服務，讓得雲成為冷卻系統權威。
HYDROKOMP GmbH
产品描述 :
The rotary lever clamp is especially suited for clamping fixtures with only little space for the installation of clamping elements. Its construction and compact design allows flexible solutions at various installation conditions. HYDROKOMP offers hydraulic rotary lever clamps which are single-acting as well double-acting. They are used in clamping fixtures whose oil supply is made through drilled channels. To swing down the clamping arm, the linear motion is used pro rata which clamps the workpiece. To unclamp, the clamping arm swings back to where the workpiece can be safely taken out.
HYDROKOMP GmbH
产品描述 :
Coupling elements of HYDROKOMP are made of stainless materials. This enables the elements to be used for all fluids and gases that are not aggressive. Special designs eg. for water steam or other media are available on request. HYDROKOMP offers coupling elements for two different operating modes depressurized coupling or pressurized coupling. The elements for depressurized coupling can be coupled pressurized up to 25 bar, if the specified volume flow is not be exceeded. When using higher operating pressure there ockures a risk of demaging the soft seal in the check valve as the result of high flow velocities of the fluid. This means for coupling of air up to 10 bar there should be always used the coupling elements for depressurized coupling. This also applies when the coupling process is initiated pressurized. The elements which can be coupled pressurized may be coupled up to the maximum specified operating pressure on one side and / or on both sides.
