展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
Dah Young Vacuum Equipment Co., Ltd.
製品の説明 :
High Power Impulse Magnetron Sputtering (HiPIMS) is a high-power pulsed power supply system used on magnetron sputtering coating technics. Compared to the traditional DC sputtering system, HiPIMS could generate tens of times higher pulsing current to obtain a ten thousand times higher-density electron plasma. Effectively enhancing the ionization rate to obtain a non-porous, high density crystallinity film at lower coating temperatures.
DAH YOUNG's DYHC HiPIMS series sputtering coater power supply and chamber cavity are designed to provide high plasma density (1018~19e-/m3) and high ionization rate (70~100%), increasing the substrate coating compactness, adhesion flatness and corrosion resistance. The lower duty cycle (<5%) results in a significant reduction in process temperature offering more substrate options on PEN, PET, etc. fiexible substrates.
Please refer to：https://zh-tw.dahyoung.com/
PEIPING PRECISION ENTERPRISE CO., LTD.
製品の説明 :
*Automatic spindle polishing control.
*Keep the precision of spindle and no damage to spindle body.
*One setting for the maximum convenience of operation.
[After Use]
*Extend the life of cutting tools.
*Increase workpiece accuracy.
*Reduce the spindle vibration and extend the life of spindle.
RICH SOU TECHNOLOGY CO., LTD.
製品の説明 :
1. Automatic separating the parts and blasting abrasive, reduce the blasting time.
2. Equipped with air flushing dust collector, which automatically separate the dust. Correspond with the environment protection test and avoiding pollution problem.
3. Diagonal type blasting method. The operator can work and check the parts directly, which can avoid the parts missing.
4. Simulating the blasting angel and intersect blasting by CAE computer in order to achieve the surface blasting action more efficiently.
5. Suitable for bicycle and auto mobile parts, blasting efficiency increase and reduce the producing cost.
TSYR TZUN INDUSTRIAL CO., LTD.
製品の説明 :
PRODUCT FEATURES
FM-35DL Comes with drilling force control unit for Auto-feeding:
When drill bit is worn out, this unit will drive feeding intermittently or stop feeding. Once feeding becomes difficult while making a hole, please replace a new drill bit or re-sharpen the worn out one in order to protect both drilling tool and machine body from being damaged.
FM-35DL Comes with two intermittent breaking rates for breaking chips:
Choose different feeding rates according to different drill bits and material to perform Auto-feeding operation. This device can break chips intermittently and discharge them while Auto-feeding is processing, so that chips would not roll on drill bit.
Easier to discharge chips.
The machine body is with height adjustment. It’s suitable for both lone and short annular cutters as well as general chuck which is for holding drill with straight handle.
The general chuck is applicable for holding drill which is with straight handle for drilling smaller holes(from 8-13mm).
HOLDING ELECTRIC CO., LTD.
製品の説明 :
Holding Magnetic tools honing edge machines can achieve the following effects in a short time.
1. Trim the chipped and sawn edges to remove burrs and burrs.
2. Achieving consistent rounding processing, making the blade smooth, smooth, and sharp, durable.
3. Improve the surface finish and surface roughness of the workpiece.
4. Increase tool life and reduce the probability of chipping. The measured value can increase the tool life by up to 65%.
TSYR TZUN INDUSTRIAL CO., LTD.
製品の説明 :
PRODUCT FEATURES
With circuit protection of breaking for motor, once any wire of three phases power source is broken off, this unit could cut off current to motor to prevent motor from being burn out.
Drill sleeves、tapping adaptors and borer holder are with rapid adaptors, very convenient for replacement of cutters.
Tapping adaptors with torsion control, tap bits are protected from being twisted off.
The rotation speed of the MTM-930A can be changed quickly during running.
It's very convenient for the operator, and the efficiency is increased accordingly.
TAIWAN 3AXLE TECHNOLOGY CO., LTD
製品の説明 :
. Processing size: 1300*900mm.
. Metal cutting configuration with Raycus fiber laser, laser wattage 1000W
. Non-metal cutting configuration 320W Co2 laser tube + professional thick plate cutting head
. Professional cutting system, "one-key switch button" on the machine, can easily switch between metal cutting function and non-metal cutting function.
. This equipment is specially designed for cutting a variety of materials, whether metallic or non-metallic.
. We combine the top-standard Co2 non-metal laser cutting machine configuration with the most popular fiber laser cutting configuration currently used in one machine
. Metal cutting head, 10mm focus Z axis direction adjustment, wide cutting range; excellent and stable beam quality, perfect water-cooled structure, advanced dustproof design, effectively avoid dust intrusion.
. Co2 non-metallic laser cutting performance can perform acrylic cutting with a thickness of 30mm. Because the laser head of this model is specially designed, it shows a bright clean surface without ripples after the acrylic cutting of thick plates.
. Optical fiber laser metal cutting performance Stainless steel can be perfectly cut to 3mm without post-processing. For carbon steel, it can also be cut to a degree of 6~8mm. It is the same grade for professional cutting applications.
MATRIX PRECISION CO., LTD.
製品の説明 :
GHP-3540 applies the FANUC controller and high speed grinding spindle, through the in-house developed intelligent conversation window software, it can flexibly output the required tooth profile and grinding parameter. The machining workpieces include the involute gears and cycloidal gears, the high efficiency and high precision expressed from the product are equivalent to worldwide top brand's ones. GHP-3540 is your best choice.
