展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
TAI CHONG CO., LTD.
製品の説明 :
用途： CNC切削中心機，銑床，龍門銑床，電腦銑床等切削作業。<br />
特性：<br />
本體與面板一體成型加工完成。<br />
以電控操作，快速充脫磁場變換。<br />
以永久磁鐵吸著工件，沒有停電的危險性。<br />
吸磁作業面，螺栓孔可應用於模具及固定方式的變化。<br />
可配合彈性導磁塊，針對變形平面，作平面加工，大量節省調整時間，提高工作效率。<br />
結構剛性佳，配合精度穩定，適合高精度加工作業。<br />
與強力型電磁鐵比較，大幅度節省電力消耗。<br />
防水效果最確實，保證不漏水，不漏電。<br />
平均吸磁力18kgf/cm2以上。
YOKE INDUSTRIAL CORP
製品の説明 :
1. 360° rotation and 230°pivot
2.Rotatable under load due to its unique ball bearing design.
3.Manufactured in accordance with EN1677‐1 and the requirements of ASME B30.26
4.Certified by DGUV GS‐OA‐15‐04
5. Forged alloy steel, quenched and tempered
6.With the Grade 100 High‐strength alloy steel, WLL is increased without increasing swivel size compared to other Yellow Point models.
7.4:1 Design factor
8.100% Magnaflux crack detected
9.Proof load at 2.5 times the WLL
10.Fatigue rated for 20,000 cycles at 1.5 times the WLL
YOKE INDUSTRIAL CORP
製品の説明 :
1. Size from M8 to M90 to fulfill your demand
(M8 ※ 0.3t _ M90 ※ 40t)
2. Design Factor 4:1, Working load limit could be up to 40 tons
3. Lifting point is made by forged alloy steel, quenched and tempered
4. Suitable for all loads which swivel and tilt especially for heavy duty, material handling, mold & die industries.
5. Ball bearing inside is easier for flipping working piece and rotation.
6. Light weight, High Performance, easily for using
7. Deliver with test certification to guarantee your safety
YOKE INDUSTRIAL CORP
製品の説明 :
•Rotates through 360° and pivot 90°.
•Manufactured from alloy steel, quenched and tempered.
•Manufactured and tested in accordance with EN1677-1.
•Load rated parts are 100% magnaflux crack detected.
•Individual forged parts and cap screw are traceable to Test Certification.
•Bolts are Metric thread (ASME / ANSIB18.3.1M), specification is grade 12.9 alloy socket head screw per DIN EN ISO 4762.
•Individually proof tested to 2.5 times the WLL.
•Fatigue rated to 1.5 times the WLL.
•All YOKE Lifting points meet or exceed all the requirements of ASME B30.26.
•Quick and simple assembly, just a tapped hole is required.
Taiwan TeamA Tech. Co., Ltd.
製品の説明 :
Form 3L為 Formlabs 推出的大型光固化3D列印機，是一款成型空間達擁有達33.5*20*30cm的桌面級3D列印機，讓您的想像力不受限！採用最新專利研發的低應力光固化成型技術（LFS），擁有彈性樹脂槽與封閉式光學模組（LPU）等，大幅增加了機器的可靠與穩定性，精確度、平滑度及透度都大大增加，讓您的大物件也擁有精緻細節！搭配Form Wash L自動清洗機與Form Cure L溫控光固機，以磁力迴旋可一次清洗一個Form 3L平台或是兩個Form 3平台，並使用兩個500W加熱器與大功率紫外線燈全方位高度強化，發揮材料最佳性能！
Form 3L特色包含
1. 33.5*20*30cm 超大列印空間
2. 大型物件也有大大的細緻度
3. 彈性成型槽印大型實心物件也不怕
4. 專利LFS技術配合光學模組使透度平滑度大幅提升
5. 雙卡匣智能給料，安心列印不中斷
6. 高達20多種樹脂滿足外觀、功能驗證需求
7. 輕觸支撐材，好拆不麻煩
8. 繁體中文切片軟體PreForm超好用
CLAMPTEK ENTERPRISE CO., LTD.
製品の説明 :
Clamptek’s CLKA series is using the optimal designation, so the clamping capacity is higher than other cylinders. The cylinder body and the fulcrum are integrated structured. Therefore, the cylinder’s size is smaller and it’s more solid and firm.
Clamptek’s CLKA series uses special dust seals to ensure the high dust proof and high sealing performance. As for the lower flange part, which uses minimized designation, it’s suitable for the compact and light fixture.
If you have any customized requests, please feel free to contact us.
Please kindly check the suggested operating pressure as below,
Max. operating pressure: 70 kgf/cm2
Min. operating pressure: 10 kgf/cm2
