展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
VISION WIDE TECH CO., LTD.
製品の説明 :
GSF Series 5-axis Gantry Type Machining Center, provided excellent 5-axis simultaneous accuracy performance for 5-axis machining in mold cutting, highly precise contour finishing, milling, drilling, and tapping. Vision Wide manufactured the 5-axis machining center to shorten tool displacement travel and cutting process effectively, and to extend tool lifetime and offer the best choice for composite angle machining. GSF Series had excellent dynamic performance on one-piece structural and equipped high accuracy 2-axis head to achieve 5-axis simultaneous accuracy performance.
•Continuous 2-axis head
•5 axis dynamic rotation synchronization accuracy (TCPM) 0.04mm.
•Built-in Spindle Direct-Driven on B&C axis, 12,000~24,000rpm spindle speed.
•Backlashless driving on B/C axis，Rotation Positioning accuracy ±5”.
•Low table height, closer operating zone, wider door width are convenient design for user.
•Chain type chip conveyor (standard) is able to remove iron chips efficiently.
JIUH-YEH PRECISION MACHINERY CO., LTD.
製品の説明 :
1.以「電子式MPG」自動化技術、減少誤動作、節省人力
2.MPG微量進給，高精密、高效率之滾珠螺桿，及伺服馬達
3.人機介面之設計
4.立臥兩用雙主軸一體式結構設計
5.主軸溫升防護系統、潤滑油冷卻循環裝置加上非接觸式與迷宮式路徑結構設計
AUTOGRIP MACHINERY CO., LTD.
製品の説明 :
For stationary chuck, there are pull back, pull lock, thru-hole/non-thru-hole stationary chucks in the category.Multi-plate.4-plate(MP4)=>
For milling machine / machine center.
Allow simultaneous machining with up to 4 grippers.
(Order can be customized for 2,3,6 grippers).
Work with SP/SD/SU/SE vertical chuck.
Driven by Hydraulic or Pneumatic.
Individual circuit for each chuck.
Special design and reduce the height of working surface.
Lock valve unit (option).
Air tight detection function(option).
KEYENCE TAIWAN CO.,LTD
製品の説明 :
● Xθ平台輕鬆操作<br />
● 兩張A3紙大小，輕鬆擺設<br />
● 介面簡單，30分鐘即可上手<br />
● 探測器CAMERA同時觀察量測<br />
● 不挑環境，大幅降低導入成本<br />
● 無人為量測差異，自動記錄量測值
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
製品の説明 :
1. CEN03 type is without timer (also could be controlled by Programmable Logic Controller) and has to work with volume distributors. With CAB or CBB type volume distributor, oil will feed during operation time. With CDB or T type volume distributor, oil will feed during interval time.
2. The discharge volume is fixed. The lubrication points of volume distributor supply a fixed flow of oil.
3. It has a spark-eliminator inside to prevent the sparks producing when the electric current is running. The spark-eliminator can avoid PLC (Programmable Logic Controller) being interfered.
4. CEN03 type has a pressure switch device and been set up as 8kg/cm2, which assures the oil volume of lubrication point and check if the piping works normally. The standard specification is NC (Normal Close) contact, which means if the pressure is abnormal, it will have signal. NO (Normal Open) contact is available on request.
5. It has a float switch that can detect the oil volume. When oil is lower than the minimum level, the float switch will automatically send a continuous signal.
6. It has a pressure gauge where an operator can check the pressure easily.
7. Do not press the force feed-oil (F button) more than three minutes in order to avoid overloading. When the temperature reaches 100℃, the sensor will be on to stop the motor continuing running about 5 minutes.
8. It can be used for the machines requiring strictly rationing oil flow. It is usually used for such as processing machines or projecting machines.
Bay Union Abrasive Technology Co., Ltd.
製品の説明 :
高韌性白色微晶磨料，搭配特殊綠色LG結合劑製作，
達到切削力與壽命的完美平衡。
工件材質:調質、滲碳熱處理。
ZHONG YANG CUTTING TOOLS CO ., LTD.
製品の説明 :
1.採用流通性高的C型刀片
→即使用市場上最常見的CC06、CC09、CP05刀片
2.整合刀片
→減少刀片使用種類，方便管理
3.使用100度角
→即4個角都可用到，節省成本
4.加工多樣化
→可鑽！可車！可銑！
影片連結：
https://www.youtube.com/watch?v=b-7HmDGipJc&t=2s
ASMITH MANUFACTURING COMPANY
製品の説明 :
★Handle: FRP has high stiffness and high loading. Load capacity 60 kgf, it is very light and an insulator to electronics. Users will not be frostbitten when the operating temperature is frozen.
Holder: The hole pitch can be adjustable within 18mm, easy to install. Waterproof (IP66). Working temperature is -20℃~150℃, resistance to acid, alkali, and greasiness.
Two ways for install: 1. Inner stationary type. 2. Outside stationary type.
In accordance with RoHS.
➤Material-Handle : Fibre-reinforced plastic(FRP), Black or Silver
➤Material-Holder : Polyamide(PA6-GF33), Black or Silver.
TAIWAN PRECISION GEAR CORP.
製品の説明 :
1. 提供7.5-200寬幅的比數範圍選擇。<br />
2. 于80-200的高減速比下，能提供較強的扭力值。<br />
3. 安全係數至少保持1.0，物超所值。<br />
4. 齒輪傳動效率高達90%<br />
5. 彈性的馬達選配，可依需求搭配交流、直流或無刷馬達。<br />
6. 出力端可選擇中空孔或實心出力軸。<br />
7. 採用高品質黃油潤滑，免加油，低維修成本。<br />
8. 低噪音，提供安靜的作業環境。<br />
9. 交流馬達可選用三相60-120W，單相70-90W<br />
10. 鋁合金接線盒，輕巧美觀，安全耐用。<br />
11. 馬達F絕緣等級，IP54，可選擇全密或半密設計。<br />
12. 可加裝剎車或配合變頻器與控制器，改變轉速。<br />
• 3 PHASE: 60W, 100W, 120W<br />
• 1 PHASE: 45W, 60W, 90W<br />
• 減速比：1:7.5-200<br />
