展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
製品の説明 :
1. KGC and KGCP types are suitable for grease NLGI grades 000, 00 and 0.
2. Recommend using a grease gun for filling with lubricant from grease inlet. It can avoid air or impurities dropping into the reservoir.
3. KGC and KGCP types are controlled by PLC (Programmable Logic Controller). It can work with CV type Progressive Feeders which can supply fixed volume of grease. CV type Progressive Feeders can assure each of lubrication point has equal amount of grease.
4. Pressure switch can be added on request for checking if the piping works normally. The standard setting is at 60 bars and the standard specification is NC (Normally Closed) contact, which means if the pressure doesn't reach the default setting, it sends continuous signals. NO (Normally Open) contact is available on request.
5. Magnet Level Switch is also an optional accessory that can be added upon request. It sends continuous signal automatically when the grease level is lower than the minimum level.
6. For the first time use, slightly press the Feed button (F button) to feed grease immediately. F button can be used as manually grease feeding for no more than 3 minutes.
7. AC110V and AC220V motors have thermal controls. When the motor temperature reaches 100℃, the sensor will be on to stop the motor continue running about 5 minutes.
8. It has a pressure gauge that the operator can check the pressure easily.
9. It can be used for the machines requiring strictly rationing grease flow. It usually works with rubber or plastic machines, press machines, machine centers, woodworking machines, etc.
Giant Red-Wood Int’l & Co. Ltd
製品の説明 :
RW-600A Hydraulic Riveting Machine (Mitsubishi 10” HMI)
(Without Feeding System)
-Safety Device to protect finger get injured
-Proportional Value Control System
-Double-Pumps hydraulic Designed
-Auto-Riveted Counting to avoid missing riveted
-Mitsubishi 10” HMI
-Control System: Mitsubishi PLC
-Pressure Range:2-53KN(6T)
-Horsepower：3HP
-C type throat depth：450mm
-C types throat height：400mm
-Power Voltage：220V Three-Phase
*Mitsubishi 10” HMI can ensure the pressure during the operation. It also can auto-check for faulty.
*Suitable Rivet：Nut up to M10, Bolt up to M8, FH Screw up to M6 (Carbon Steel)
* Proportional Value Control System: Specific Pressure adjust bottom designed, can adjust correctly pressure within 10 second, precision within+/-1%.
*Positive Stop System: Designed for soft working pieces to ensure the flat surface. Thickness accuracy up to +/-0.05mm
*OMRON 5” HMI can ensure the pressure during the operation. It also can auto-check faulty.
*Suitable Rivet：Nut up to M10, Bolt up to M8, FH Screw up to M6( Carbon Steel)
*Pressure control easy to operate: Specific Pressure adjust bottom designed, can adjust correctly pressure within 10 second, precision within+/-1%.
*Positive Stop System: Designed for soft working pieces to ensure the flat surface. Thickness accuracy up to +/-0.05mm
Parjet Co.,Ltd.
製品の説明 :
ParSave® - Bearing Isolator, is an extension of Parjet PTFE products. It is a sealing device developed to protect the rolling bearings of rotary equipment and can replace traditional lip seals (also known as rubber oil seals). The special configuration of the labyrinth ring combination helps to eliminate common sealing issues. Common issues includes the shaft damages caused by the wear of the rotating shaft from the lip seals and malfunction caused by the intrusion of foreign objects or water vapor. ParSave® can effectively extend the service life of the bearings and rotating shafts. Additionally, due to the unique sealing mechanism, there is no contact between mating surfaces, so there are no potential wear and pollution problems. With the characteristics of the PTFE material such as excellent heat resistance, self lubrication and chemical resistance, ParSave® can operate effectively under harsh environments.
COMPLETE PRECISION TECH CO., LTD.
製品の説明 :
CIMA系列量測儀採用國際先進的有限元分析設計方法，使其具有機械結構剛性強、幾何誤差小，具有高精度、高性能和高穩定性的優點。機械整體結構採用剛性結構好、品質輕的全封閉框架移動橋式結構。其結構簡單、緊湊、承載能力大、運動性能好。固定優質花崗岩工作臺，使其具有承載能力強、裝卸空間寬闊、便捷。<br />
Y向導軌採用燕尾式，定位精度高，穩定性能好。 三軸採用優質花崗岩，熱膨脹係數小，三軸具有相同的溫度特性，因而具有良好的溫度穩定性、抗實效變形能力，剛性好、動態幾何誤差變形小。<br />
三軸均採用自潔式預載荷高精度空氣軸承組成的靜壓氣浮式導軌，軸承跨距大，抗角擺能力強，阻力小、無磨損、運動更平穩。<br />
橫樑採用精密斜梁設計技術，重量輕、重心低、剛性強，動態誤差小，確保了機器的穩定。<br />
CHUAN TAI HYDRAULIC MACHINERY CO., LTD.
製品の説明 :
The oil return filter is mainly installed on the oil return line of the hydraulic system. Various impurities such as abrasive particles generated during the work of various hydraulic components can be blocked by setting the oil return line to filter and avoid returning to the tank again.
