Theme
Digital Transformation
Green Transformation
ADLEE POWERTRONIC CO., LTD.
Product Description :
Product applications:
Internal & External grinder 、Conveying equipment、Coffee roasting equipment、Centrifugal equipment、Polishing equipment、Emulsifying machine、Glass edge grinder、Auto polisher grinder, etc.
Brushless DC Motor
1. Minimize EMI and maintenance free. Low noise.
2. Specialized design to have smooth shaft rotation and improved reliability.
3. Brushless DC motor is light weight and compact size, higher power density, higher torque density and higher efficiency than conventional motors.
4. The structure has an excellent behavior in energy saving during heavy load operation. The high efficiency range is much wider than other motors too.
5. Built-in NTC thermal resistor to prevent over heat problem.
AC Driver
1. Available for all control interfaces, ex. RS 485, direct signal, PLC, HMI.
2. Convenient 220VAC driver power input from 60W. No more 24VDC power supply.
3. Built-in 24VDC mechanical brake control power.
4. Real motor speed display and signal output.
5. Panel control is always enabled with removed control or terminal control or RS485 control. Convenient for system set up or maintenance.
6. Excellent speed stability. Open loop and close loop speed control for selection.
7. With 0~5VDC, 0~10VDC and 4~20mA speed analog input.
8. Over current / heat / voltage, electric motor lock protection.
TAIHO TOOL MFG. CO., LTD.
Product Description :
AE-VM features good stiffness, unequal lead and helix angle to enhance anti-vibration.
New flute design fulfills better chip removing.
New Coating “DUARISE” provides advantage on lubricity, wearability, high temperature oxidation resistance, and muti-layer structure can prevent it from thermal cracking.
Standard Type and Short Blade Type(AE-VMS、AE-VMSS):Square, Radius, and 90°(-RA) end mill.
3D, 4D Long Blade Type(AE-VML):Square, Radius, and Chip-breaking flute(AE-VML-N) end mill.
Side Milling Type(AE-VMFE): Square, and Radius end mill.
HYDROKOMP GmbH
Product Description :
Coupling elements of HYDROKOMP are made of stainless materials. This enables the elements to be used for all fluids and gases that are not aggressive. Special designs eg. for water steam or other media are available on request. HYDROKOMP offers coupling elements for two different operating modes depressurized coupling or pressurized coupling. The elements for depressurized coupling can be coupled pressurized up to 25 bar, if the specified volume flow is not be exceeded. When using higher operating pressure there ockures a risk of demaging the soft seal in the check valve as the result of high flow velocities of the fluid. This means for coupling of air up to 10 bar there should be always used the coupling elements for depressurized coupling. This also applies when the coupling process is initiated pressurized. The elements which can be coupled pressurized may be coupled up to the maximum specified operating pressure on one side and / or on both sides.
YOKE INDUSTRIAL CORP
Product Description :
1. Size from M8 to M90 to fulfill your demand
(M8 ※ 0.3t _ M90 ※ 40t)
2. Design Factor 4:1, Working load limit could be up to 40 tons
3. Lifting point is made by forged alloy steel, quenched and tempered
4. Suitable for all loads which swivel and tilt especially for heavy duty, material handling, mold & die industries.
5. Ball bearing inside is easier for flipping working piece and rotation.
6. Light weight, High Performance, easily for using
7. Deliver with test certification to guarantee your safety
TAIHO TOOL MFG. CO., LTD.
Product Description :
The blade design that emphasizes cutting force and the unequal lead groove shape promote chip discharge and realize high-quality threading.
The lineup includes screw type for blind holes and through holes, and features that chips are discharged upwards.
The tip sample is for through holes, and the characteristic is that the chips are discharged downward.
There are two types of pipe specimens: parallel thread for mechanical bonding and tapered thread for tightness.
Fulson Industrial Co., Ltd
Product Description :
This machine is the crystallization of the technology that Fushun has carefully researched for many years. It has a stable appearance and a strong structure. Various operating handles and movable operating panels are within the operator's best line of sight and the most comfortable operating position. This is in line with the ergonomic design. Excellent models, providing you with higher work efficiency.
Spindle mechanism: The spindle is supported by five ultra-precision beveled ball bearings. Stable and strong main shaft structure, can withstand heavy load grinding.
AC servo motor lift drive: C3-level drive screw, driven by AC servo motor, with large torque, fast speed, and high positioning accuracy. With the full CNC system, the feed accuracy can reach 0.0001mm or 0.001mm.
Two lines and one hard track: Z-axis and Y-axis purchase high-precision line rails, and cooperate with high-precision ball screws, which can make the action smooth without lag; , maintaining accuracy without distortion.
Front and rear transmission speed control: The continuous movement speed of the saddle is driven by AC servo motor to obtain good surface grinding accuracy.
