Theme
Digital Transformation
Green Transformation
TAIWAN MORE-CASH VILLAGE CORP.
Product Description :
For 3mm-20mm End Mill Re-sharpening , Adjustable Angle
Precise Grinding Results , Precision Assurance within 0.02mm
Center Cutting Available
High Accuracy Balance between each flute of the End Mill
Easy to Operate , grinding an End Mill within 1 minute.
Special Design High Accuracy Alloy Steel Collets
Accurate Grinding consumption 0.2mm
High Efficiency DC motor
Stable Quality Diamond Dust Grinding Wheel
Considerable Design, Invisible Tool Box, Delicate & Friendly Use
Portable Design with only weight 14 kgs.
HO CHEN MACHINERY & ELECTRIC IND. CO., LTD.
Product Description :
XYZ軸行程：1000x600x500 mm (39"x24"x20") inch
工作台：1250x750 mm (49"x29" )inch
最大工件：2000x1150x625 mm (79"x43"25") inch
最大工件重：4500 kg
最大電極重：350 kg
機器淨重：5700 kg
油位高度: 110-450 mm (4"-18" )inch
佔地面積尺寸(長x寬x高)：4010x4050x2880 (158"x159"x113") inch
電極板至工作台面距離：430-930 mm (17"-37")
過濾箱：2
過濾網：4
容量：1900公升
3D CNC WINDOWS CE 控制器特點：
> 本系統是採用Windows CE 控制器。
> 採以對話式視窗來呈現且搭配圖片描述功能。
> 具有專門維修畫面來加快維修速度。
> 本機三軸均採用數字尺回授之全閉環迴路設計，故能使定位精度及ORBIT-CUT加工精度及效率大幅提升。
> 具有良好且簡易的操作介面。
*常用的功能鍵都在操作面板上直接使用。
*具有快速按鍵功能。
> 可加裝ATC自動換刀及加裝C軸360度分度，可自動修飾從粗加工至超細加工一次完成。
> 對話式程式，提供各種擴孔模式(各種快速尋邊，尋中心、尋基準點功能)。
> 具有較高顏色的畫質（與PC相同高畫色）。
> 可做自動多段加工(粗→中粗→中細→細→極細)，最多可達10段。
> 加工條件採用加工檔案方式儲存，具有無限組加工條件，每組加工條件可直接編輯修改或儲存，編輯簡易查詢方便。
> 自動尋原點功能及多點座標記憶功能。
> 1/2設計功能及ARC自動放電波形偵測與自動調整。
> 自動中心測位自動補償，可尋孔中心尋孔最深點。定孔加工(循環式、獨立式)，適合不同加工情況。放射狀、圖形、方形、直線(向量式)、錐度、45°擴孔加工。
> 三軸直線、二軸圓弧、三軸螺旋。
> 中/英文版及公/英制切換和Z軸快上、快下及慢上、慢下功能。
> 單軸側放，三軸，六種方向(平面旋轉)。
> 所有警報都可詳細描述發生的問題點、紀錄時間、日期。
> 採光學尺Close-loop位置控制，精度高。
> 自動編輯。可依材質、面積、加工深度、單側間隙、最終電流、電極磨耗等設定。
> CNC機型同樣具有傳統式等能量釋放功能，加工穩定快速，電極消耗小，表面精度均勻。
> 監視畫面加工路徑顯示和圖形顯示功能。
PRECISION MOTION INDUSTRIES, INC.
Product Description :
●Equipped with lubrication unit G1, it can reduce the amount of oil used to meet the economic and environmental protection needs in response the carbon reduction trend.
●In required clean environment where it is necessary to avoid oil scattering, and also prevent to temperature rise caused by injecting too much oil.
●Contains more than 70% oil and can run more than 20,000km without oil supply, also easy to supply oil in difficult filling places and saving a lot of maintenance time.
●Even in an environment with water, there is no need to worry about oil and grease being washed by water.
●The extra lubrication unit equals an extra layer of scraping effect, which greatly reduces the chance of foreign matter invasion.
NINE-9 CUTTING TOOLS CO., LTD.
Product Description :
Nine9 chamfer mill is designed for chamfering and countersinking with an indexable insert.
The insert is a specifically designed for use in high speed machining ; the multiple flutes
provide for increased feed rate, optimizing performance and reducing cutting time.
High performance chamfer tool for upgrading your machining process.
For front and back chamfering. Eliminates 2nd operation or deburring time.
● Excellent Repeatability
• Smallest Indexable counter sink, diameter ø7 mm.
• The insert is dual-relief angle, specially edge honning and optimized coated for high cutting speed.
• Optimized the number of teeth on the holder to achieve higher feed rate.
● Economical
• Each insert has 4 cutting edges.
• Long tool life.
● Applications
• For front and back chamfering.
• 90° counter sink and 45° chamfering.
• For counter sink, circular chamfering, contour chamfering and face milling.
Parjet Co.,Ltd.
Product Description :
PTFE Glide seal sets consists of a PTFE sealing element with a rubber O-ring functioning as elastic energizer. This type of Teflon seal is mainly used to seal reciprocating rods, pistons, and plungers, commonly found in hydraulic and pneumatic applications. The required sealing effect is achieved by radial pressure, produced by the preloaded element and system pressure, on the lip against mating surface. The elastic energizer pushes the PTFE ring against the mating surface which provides the initial sealing force for the PTFE seal.
CAPTAIN SCIENCE CORPORATION
Product Description :
Established in 1935 as a subsidiary of The Felters Company, originally working primarily in the shock/vibration field, UNISORB® has grown to be the leader in providing a full spectrum of advanced products and innovative engineering for the installation of a wide variety of capital equipment used in General Manufacturing, Metalworking, Testing and Verification, Printing, Power Generation, and a wide variety of other areas.
ECHAINTOOL PRECISION CO., LTD.
Product Description :
"鎢鋼鑽頭為益詮2020年全新上市主力產品，採用國外進口五軸刀具研磨機生產製造，研磨尺寸精準且穩定，提供高品質鎢鋼鑽頭服務。
產品特色：
(1)鎢鋼刀體為含鈷量12%超微粒硬質合金，高剛性耐磨耗耐高溫，可以加工切削HRC<55°工件(2)鑽尖結構加強優化設計，提升切削排屑性能(3)獨特雙刃帶設計，提升加工穩定性，可增加切削加工使用時間(4)全新AlTin鍍鈦塗層，泛用性廣可適用：合金鋼、不鏽鋼、鑄鐵加工。
益詮精密專業製造：(1)捨棄式車刀：新增中心出水外徑車刀架和中心出水內徑車刀架(2)捨棄式铣刀：新增捨棄式粗铣刀、捨棄式T形槽铣刀(3)捨棄式刀片：整合各式車刀片及铣刀片新材質開發(4)鎢鋼端铣刀：新增鎢鋼鑽頭，極小徑鎢鋼一體式車刀，開發新鎢鋼圓棒及特殊研磨刃口端铣刀。
為因應廣大市場需求，益詮精密持續開發精進新增所有刀具品項，不斷努力提升產品品質和服務，秉持初衷努力不懈進步成長，生產製造以最高品質要求，期盼能成為台灣製造業的後盾。"
LEADWELL CNC MACHINES MFG., CORP.
Product Description :
Spindle nose A2-6 with 8” inch chuck for both spindles. The bar capacity of the main spindle is up to 52mm. Spindle uses high-power built-in motor with a maximum torque of 292Nm which for heavy cutting and surface milling operations. The capacity of the Y axis is ±50mm, which allow offset processing and increase the speed of milling.
Max. swing: 790mm
Max. turning diameter: 300mm
Max. turning length: 770mm
Bar capacity: 52mm
X1-axis travel: 235+15mm
X2-axis travel: 220+10mm
Z1-axis travel: 770mm
Z2-axis travel: 790mm
B-axis travel: 770mm
Y-axis travel: ±50mm
Spindle speed(Main/Sub): 4500rpm
Spindle nose(Main/Sub): A2-6
Spindle motor power(Main/Sub): 25kw
Number of tool stations: 16T
