Theme
Digital Transformation
Green Transformation
FAIR FRIEND ENTERPRISE CO., LTD.
Product Description :
★Gantry type structure
- Designed with a gantry type structure, the Feeler U800-5AX 5-axis machining center has the feature of spacious machining space, allowing large workpiece to be loaded and unloaded with ease. It is also convenient for operator to check the current machining condition at any time.
★U-shaped construction of base and column
-The advanced U-Shape structure significantly increases structural rigidity and machining accuracy.
-X.Y.Z axis rapid traverse rate reach 48m/min.
- Suitable for equipping with a large diameter of rotary table.
★Three axes overlap and separated from two rotary axes
- This design avoids a distance between the machining point and the intersection point of two rotating axes.
- Easy to compensate for the errors of radius on rotating axes and movement on three linear axes to ensure the machine's stability and accuracy.
★Separated design for three axes moving area and machining area
- This design feature not only makes chip removal more convenient, but also enables better chip-prevention capability of the machine.
- The rotaary shaft speed is increased by 800 rpm, which makes the turntable have a high-speed turning function.
YING HAN TECHNOLOGY CO., LTD.
Product Description :
5-AXIS VERTICAL MACHING CENTER BELONGS LINEAR WAYS ON THREE AXES, X, Y, Z -AXIS TRAVEL: 800x600x550mm, MEEHANITE CAST IRON IS TEMPERED FOR STRESS RELIEF TO ENSURE STRUCTURAL STABILITY WITHOUT DEFORMATION. REINFORCED COLUMN BASE GREATLY INCREASES STRUCTURAL STRENGTH AND WILL EXHIBIT ULTRA-HIGH STABILITY DURING HIGH SPEED OPERATION. WITH THE EQUIPMENT OF CNC TILTING ROTARY TABLE, THE MACHINE IS ABLE TO PERFORM 5-AXIS MACHINING, IT CAN MACHINE COMPLEX, MULTI-SIDED PARTS IN A SINGLE SETUP, THEREBY REDUCING SETUP TIME WHILE INCREASING PART ACCURACY.
FAIR FRIEND ENTERPRISE CO., LTD.
Product Description :
★Moving column structure :
The M-shaped structure increases anti bend and anti-torsion of the column The counter-weight is supported by the pneumatic cylinder. The shape of the column is similar to the pyramid to increase the stability for moving.
★One piece base structure :
The rigidity of structure is good. The outer shape is not complicated, it is easy for machining. The internal structure adopts the box type design to increase the bearing capacity.The round shape hole is easy to clear sand and increase force flow. The work tableadopts the high and low rail design to increase the rigidity.
★Rotary spindle head structure:
Reduce the interference machining area.
★Modular design :
By changing the column head of the column, etc., the customer can have a variety of opportunities to choose from.
★Turning and milling function(OPT)
Shorten the product manufacturing process. To improve the production efficiency, accuracy and reduce the clamping times and floor space. It can be used in aerospace parts and medical equipment precision molds.
GENTIGER MACHINERY INDUSTRIAL CO., LTD.
Product Description :
- “U” shaped base is one-piece fabricated for maximum stability and rigidity.
- X-axis federate is transmitted through a specially designed rotating nut, it prevents the ball-screw runs out during rotating and makes feed motion response faster.
- Coolant inter ball-screws on three-axis prevent ball-screw deformation, it suppresses thermal growth and thermal displacement on the ball-screw while assuring smooth feed motions and high positioning accuracy.
HC FENG CO., LTD.
Product Description :
4 in 1 Coolant Purification System
1. Filtering floating debris and dirty particles
2. Oil/Water Separation, removes tramp oil down to 5% water content
3. Ozone Disinfection, eliminates bacteria and cleaned fluid backflow
4. Automatic control panel and pH detect device
EUMACH CO., LTD.
Product Description :
HSM-5X系列是最新的機器與萬能的應用，完美回應數控五軸加工與工件的定位與刀具軸空間要求，為複雜零件的加工提供了廣闊的應用範圍。
本機採用C型架構，機床為高剛性完全支撐結構，機械經久使用，能長時間維持穩定狀態，旋轉銑頭B軸與旋轉工作臺C軸為獨立分開無重迭之兩旋轉軸，便利於工件、刀具及夾制具等設計及擺放，尤其相互干涉現象較旋轉兩軸重迭之銑頭或工作臺大幅減少。並可選用車銑主軸及高速旋轉工作台，達到車銑複合綜合加工。
HSM-5XC是大型高效切割和加工應用的最佳解決方案，無論您的重點是靈活的單元生產還是大批量精密製造，如航空工業的渦輪葉輪，葉盤等，或醫療的心臟瓣膜，人工關節或牙齒等，當然，一般加工，如模具加工或僅5面或多面加工都非常容易！
本機採用實的米漢娜鑄鐵結構，三軸為重型滾柱直線導軌進給系統，能很短時間內加速到48m/min，三軸行程1020/610/610mm，力矩電機驅動B軸連續擺動銑頭0.001角度分割，旋轉範圍-30~120ﾟ，裝進口電機主軸26&32Kw / 124&154Nm / 18000RPM/HSK-A63設計及標準長工作台崁入φ610mm由力矩電機驅動的旋轉工作臺(C軸)，最大轉速50RPM承重500KG，搭配HEIDENHAIN TNC640，15”螢幕的五軸連動控制器，HEIDENHAIN高精度三軸光學尺，刀臂式60把刀，該加工中心用於多面高性能加工和最智能的加工概念提高了生產力。
SHE HONG INDUSTRIAL CO., LTD.
Product Description :
Huge Range of Machining Heads Hartford delivers a full range of machining head options to customize the machine to your particular cutting requirements. We also offer the auto swivel arm head changer to automate the head changing process and save you machining time.
Automatic heads
+Automatic Universal Head(5°/2.5°/1°)
+Automatic 90° Head(5°/2.5°/1°)
+Automatic Extension Head(350/500mm)
CAMPRO PRECISION MACHINERY CO., LTD.
Product Description :
Campro spares no effort to develop intelligent manufacturing; fully demonstrating its determination from Industry 3.0 to 4.0, Campro not only has successfully launched CAMPRO IIoT system in line with Industry 4.0 elements in 2016, but also developed its CAMPRO Smart FMS system in 2018. Through flexible manufacturing system, digital control and automated NC program and machine assignment that it can quickly react in case of changes and respond to market demand. In addition, CAMPRO also develops, CAMPRO TOOLING MANAGEMENT SYSTEM, a proprietary system combined with precision tooling/material cabinet to assist customers in managing and analyzing tooling/material usage, 24 hours to get tools or materials and early-warning or alert notifications. In some cases, the fact is increasing automation can improve worker safety and the flexible automation processing is sufficient enough to cope with complex manufacturing processes.
