Theme
Digital Transformation
Green Transformation
FARSIGHT PRECISION CO., LTD.
Product Description :
Finished leaking testing just only 1 minute !!!
Leaking Testing Machine (Pressure testing machine)
◎ Our company could according to products request of
condition of client, design and manufacturing dry type,
wet type or dry-wet 2 ways in one leaking testing
machine.
◎ 2 workpiece finished at the same time.
◎ The client can select the "COSMO", "FUKUDA" or other
leaking testing instrument, and install user-interface
system.
◎ Attach computer storage, calculation and network output
etc...
◎ The equipment could exchange the workpiece quickly.
◎ The equipment could exchange fixtures for other
workpiece.
◎ It can set the water tank in time.
◎ The client can option to mark on workpiece with laser or
punching.
Taiwan TeamA Tech. Co., Ltd.
Product Description :
Form 3L為 Formlabs 推出的大型光固化3D列印機，是一款成型空間達擁有達33.5*20*30cm的桌面級3D列印機，讓您的想像力不受限！採用最新專利研發的低應力光固化成型技術（LFS），擁有彈性樹脂槽與封閉式光學模組（LPU）等，大幅增加了機器的可靠與穩定性，精確度、平滑度及透度都大大增加，讓您的大物件也擁有精緻細節！搭配Form Wash L自動清洗機與Form Cure L溫控光固機，以磁力迴旋可一次清洗一個Form 3L平台或是兩個Form 3平台，並使用兩個500W加熱器與大功率紫外線燈全方位高度強化，發揮材料最佳性能！
Form 3L特色包含
1. 33.5*20*30cm 超大列印空間
2. 大型物件也有大大的細緻度
3. 彈性成型槽印大型實心物件也不怕
4. 專利LFS技術配合光學模組使透度平滑度大幅提升
5. 雙卡匣智能給料，安心列印不中斷
6. 高達20多種樹脂滿足外觀、功能驗證需求
7. 輕觸支撐材，好拆不麻煩
8. 繁體中文切片軟體PreForm超好用
CLAMPTEK ENTERPRISE CO., LTD.
Product Description :
＊High supporting force
CSP-P/ CSP-K increases the holding force between the piston rod and the inner jacket to arise the higher supporting force.
＊Coolant cleaning measures
In order to prevent the malfunction from the intrusion of high-pressure coolant and the cutting dust entering the internal structure, air can be cleaned at the breathing port when replacing the workpiece. Air cleaning requires a dedicated air circuit. (recommended cleaning pressure is 0.3 - 0.5MPa).
＊Universal piping base
CSP-P/ CSP-K piping base is interchangeable, which can be installed with other low-pressure cylinders in the same specifications.
JIN YEAR PRECISION CO., LTD.
Product Description :
1.Down thrust with"semi-sphere"to prevent workpiece lift.
2.Mechanical/Hydraulic. Two operate methods.
3.Vise body is made of ductile iron FCD-60.
4.Vise bed hardened to HRC45 and maintain accuracy for long.
5.Vise bed height-size and the guide block side are all made with full control, can 2.3 or 4 vises to perform a job at a time.
6.Vise have 4 ways of clamping. For you to choice.
YANMECH Industrial Co., Ltd.
Product Description :
Product Features：Different from the previous positioning of the box jaws by the positioning key, this product will positioning parts into the product, can be locked with the screw lock or unlock, can avoid the traditional positioning the possibility of flying out in the rotation and the advantage of easy assembly.
CLAMPTEK ENTERPRISE CO., LTD.
Product Description :
The Thread-body single acting hydraulic cylinder use imported oil seal and accessories to guarantee the quality. No oil leakage while clamping in high pressure for a long time. The volume of the thread-body single acting hydraulic cylinder is small. It can be utilized in a small space in the fixture.
This hydraulic cylinder is used to extend out, and when spring returns, but it can't be used for pulling back.
The angle degree between the cylinder and workpiece could not be larger than 10° while installing.
The bottom of the cylinder barrel needs a leakage-proof gasket.
Max. operating pressure: 250 kgf/cm²
Min. operating pressure: 20 kgf/cm²
Single acting
Usable fluid:
