Theme
Digital Transformation
Green Transformation
YIDA PRECISION MACHINERY CO., LTD.
Product Description :
The MT-900 has a 5-axis milling head, two turrets, a tool magazine and twin spindles.
The design layout allows for maintaining a large work envelope for both lathe operations-turning and milling.
All six sides of a part can be machined without an operator having to manually resettle the workpiece, so nearly any parts can be machined in an automated manner.
SONG GIA INDUSTRIAL CO., LTD.
Product Description :
●精密鉸孔神器-浮動鉸刀柄，可解決以下問題：
1. 孔的直線行差
2. 鉸刀不耐用
3. 孔的尺寸擴大，尺寸精度達不到要求
4. 孔的中間大，兩頭小，圓柱度達不到要求
5. 內孔表面粗糙度達不到要求
6. 大批生產時無法保證孔徑尺寸的一致性 。
●浮動鉸刀柄的特點：
1.可透過360度浮動讓鉸刀對準下孔徑，避免對不準而造成擴孔或縮孔
2.徑向振幅抑制在5μm以下
3.提高鉸孔光潔度
4.彌補車床公差，提高鉸孔精密度
5.提高鉸孔的直線度和圓柱度
●浮動鉸刀柄可應用加工機械：鑽床、立式加工中心、研磨機。 可夾持工具：鉸刀、滾光刀
**產品連結→→https://www.songgia.com.tw/tw/products/other-tools/floating-reamer-holder
WIN HO TECHNOLOGY INDUSTRIAL CO., LTD.
Product Description :
High Speed Precision Lathe
1. Selective bed width:
S series: 300mm.
M series: 350mm.
L series: 400mm.
2. Varied spindle bore diameters:
S series: O58mm / O80mm (Option).
M series: O85mm / O105mm (Option).
L series: O85mm / O120mm (Option).
3. With FAG or SKF precision bearings installed on
spindle, maximum cutting depth can be 8mm on
50mm diameter and best roundness 0.003mm
(200mm long).
4. Equipped with plastic rear gears, shafts and
gears inside headstock are well protected if crash
should occur (S430 & S480 Series).
5. Thermal treated and precision ground alloy
gears.
6. Universal gearbox for both imperial and metric
thread-conversion table also attached.
7. Tracks of cross slide and bed are well lubricated
with lubrication pump (manual).
8. Overload device to ensure safety when
operating.
9. Wear-resistant phosphor bronze lead screw
nuts.
10. Durable reservoir oil bath type cross slide (for S
series).
11. Thermal treated Meehanite bed casting.
12. One-piece base for high rigidity and low
vibration.
13. High-capacity coolant tank offers sufficient
coolant output.
14. All series certified for CE.
Reservoir Oil Bath Type Cross Slide
HC FENG CO., LTD.
Product Description :
4 in 1 Coolant Purification System
1. Filtering floating debris and dirty particles
2. Oil/Water Separation, removes tramp oil down to 5% water content
3. Ozone Disinfection, eliminates bacteria and cleaned fluid backflow
4. Automatic control panel and pH detect device
VICTOR TAICHUNG MACHINERY WORKS CO., LTD.
Product Description :
．Turning & Milling in one set-up
．Y-axis travel 260 mm (10.2")
．Max. turning dimension Ø500 x 1075 mm
．Turning spindle 4200 rpm / 15 KW with 8” chuck for Vmt-X200, or 3500 rpm / 22 kW with 10” chuck for Vmt-X260
．Milling spindle 12000 rpm / 22 kW
．with HSK-T63 / A63 tooling
．ATC-40 tools
JARNG YEONG ENTERPRISE CO., LTD.
Product Description :
1. External auto loading/unloading SPM
2. Its feeding capabilities are O.Dφ6~φ35 mm, max length 40mm.
3. Its feeding mechanism is placed outside of machine to keep mechanism from chips and oil stain.
4. Adjustable guideway is suitable for round/hex shape workpiece alone with rotary cylinder and fixture, which can make hex material positioning in short time.
WELE MECHATRONIC CO., LTD.
Product Description :
1.立車主軸轉盤以進口交叉滾子軸承設計，確保重負荷的能力及長期的精度壽命。
2. Z軸226 mm方型滑枕搪孔軸採硬軌配Turcite B結構，VTC1612-CW標準行程900mm。
3.底座、立柱、橫樑、工作台等大型鑄件依製造需要，經由最新的3D設計，剛性最佳化，並以
多年經驗訂定有效的退火程序以消除殘餘應力，多年實際應用經驗，確實能達成有效的長期精
度保持性。
4.X、Z軸標準配備採用「雙編碼器」的「雙」半閉環回饋系統，經濟有效的提高各軸的定位精度。
(X、Z軸可選購德國Heidenhain或西班牙FAGOR光學尺)。
5.VTC-CW標準刀庫容量為16P(16儲位)，車刀型式及分配數目可依客戶要求處理。
6.主軸箱等關鍵零件係利用自有的「大型臥式鏜孔機」及「大型高精度三次元量測儀(三座標量床)」
確實達成應有的加工精度，確保優良的組裝基礎。
7.承襲歐美先進工具機廠的標準，以嚴格維護的「1.2米x1.2米」高精密度的方形標準平板做為精密
精度的基礎，對各項關鍵零件進行精密鏟花(刮研)，使機器的各處結合面和滑動面均能達到正確的
幾何精度，確保機器應有的精度和壽命。
8.搭配高規格的Fanuc數控系統，標準功能包含：15吋彩色液晶螢幕、Fanuc全鍵式操作面板、
2MB記憶容量、Ethernet網路接口、Flash記憶卡插口、剛性攻牙及各種特殊補間(插補)等多項
高規格功能，能經濟有效的滿足各種使用需求。
9.採用的各項配套零組件均經過長期使用驗證，可確保機器長期運行的可靠性。
10.完整的品檢測試流程，搭配先進的自動光學直準儀、雷射干涉儀、球桿檢測儀、線上動平衡儀等
精密檢測儀器，確保出廠的機器都能達到設計的性能和應有的功能。
11.經驗豐富的研發團隊，突破老舊的包袱，協助客戶達成各種特殊需求。
12.兼具經驗和熱誠的服務團隊和完整的服務體系，可以及時有效的讓用戶的機器長保最佳使用狀態。
MING YANG MACHINERY CO., LTD.
Product Description :
The model MTY 51/65 is equipped with a dual spindle double turret and double Y axes. The machine is combined with FANUC 31i PLUS for simultaneous control on triple tool systems. The machining support two turrets for one spindle and one turret for two spindles at the same time. In other words, each process will collaborate with three tools. Mostly, the machine improves 50% efficiency.
